Electric magnet/inductor/motor/transformer enamle coated wire cleaning tool...

[BrianHG]

OMG, this thing actually exists, but, I don't know where I can buy one...  This would clean up soldering to transformer wire SOOO much cleaner!

Take a look at the tool here:  https://youtu.be/bsS_7EEYx1Y?t=1390

Can someone point me to a place where this device may be purchased...

[tautech]

Nice vid. 

Solder pot ?

[mzzj]

https://www.aliexpress.com/item/1340148658.html?spm=a2g0o.productlist.0.0.61f420dcmzLo5Q&algo_pvid=f9433d97-347b-40f1-9777-ce74d2be135c&algo_expid=f9433d97-347b-40f1-9777-ce74d2be135c-24&btsid=0ab6f81e15853823753954582e3249&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

[BrianHG]

Nice vid. 

Solder pot ?

Yes, a solder pot is what I use now, but the enamel leaves a gooey residue and smell when being burnt away.
That electric drill/cleaner type tool would make my end connections clean / I would not need to do additional cleaning afterward to make the wire ends look presentable.

Also, I wouldn't have to warm up a solder pot as my soldering is usually only 2-3 conductors only.

[BrianHG]

https://www.aliexpress.com/item/1340148658.html?spm=a2g0o.productlist.0.0.61f420dcmzLo5Q&algo_pvid=f9433d97-347b-40f1-9777-ce74d2be135c&algo_expid=f9433d97-347b-40f1-9777-ce74d2be135c-24&btsid=0ab6f81e15853823753954582e3249&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

[maginnovision]

https://www.amazon.com/dp/B075TWDLG2/ref=cm_sw_r_apa_i_HuWFEbCWTN0H7