Author Topic: firmware for zd915 solder station converter in hex  (Read 1105 times)

0 Members and 1 Guest are viewing this topic.

Offline audio86

  • Contributor
  • Posts: 6
  • Country: it
firmware for zd915 solder station converter in hex
« on: May 31, 2017, 07:02:29 am »
hi at all member of the forum i have a problem for the firmware for solder station zd-917 my board zd-lty-6 have the mcu c8051f310 dead and i change the mcu but the firmware i search and have only in .c i have the programmer for reprogramm the mcu and i don't have the file in hex. i add the firmware in c and please converter in hex. thanks fot the your time
 

Offline voltsandjolts

  • Supporter
  • ****
  • Posts: 733
  • Country: gb
Re: firmware for zd915 solder station converter in hex
« Reply #1 on: May 31, 2017, 08:12:03 am »
Silicon Labs used to give out free Keil licenses, maybe not anymore?

solderstation.zip has a .hex file in it, so I guess it is the other project (ss_v2.zip) which you are interested in.
« Last Edit: June 27, 2017, 05:54:18 pm by voltsandjolts »
 

Offline audio86

  • Contributor
  • Posts: 6
  • Country: it
Re: firmware for zd915 solder station converter in hex
« Reply #2 on: May 31, 2017, 08:22:30 am »
hi i try and report tell me the size of this file my programmer accepr 15mb size
 

Offline audio86

  • Contributor
  • Posts: 6
  • Country: it
Re: firmware for zd915 solder station converter in hex
« Reply #3 on: May 31, 2017, 05:20:42 pm »
the file no work when i write in the mcu the display no work have the firmware for this solderstation? my solder station is zd 982 help me please
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf