| General > General Technical Chat |
| GoPro Hero 9 Lens/Sensor Flex Cable Connector |
| (1/1) |
| JappyJan:
I want to integrate a "naked" GoPro Hero 9 into a custom Carbon Fiber Drone Frame. For this i need to mount the Sensor Module in a 90deg Offset to its intended orientation, which the original flex cable just does not really like... Therefore i need to design/manufacture an adapter that extends and angles the flex cable. Therefore i need to know the exact name of this connector but there seems to be 0 information about it and no one i asked so far did know this... Ill attach an image of the connector on the mainboard as well as on the flex cable, a link to aliexpress for a replacement flex cable and a link to a similar board/adapter manufactured by RedKyte Media. The redkite connector is listed here: https://www.redkytedrones.com/products/gopro-hero-8-9-10-pcb The Aliexpress replacement flex cable is here: https://a.aliexpress.com/_EzLQsJh The Picture of the connector is here: |
| tom66:
Could be a Molex SlimStack: https://molex.com/molex/products/family/slimstack_fine_pitch_smt_board_to_board_connectors |
| JappyJan:
if anyone finds this question, i just got send a google doc with allmost all connectors of a lot of gopros. https://l.facebook.com/l.php?u=https%3A%2F%2Fdocs.google.com%2Fdocument%2Fd%2F1eAHqe4n2lEv_fXjdm1XhQFaNaFTQ-yXP8gqrWhUJLC8%2F%3Ffbclid%3DIwAR1xQvbIOefpFJWTw_OlEtUHTe3ieVgP15HyjKZ-QgZJB3RP5snncn3OZWE&h=AT2pS6UjDZG9U9lJQ5upAgszh-M2hGoKzziD_j-47453YIOc9hwQG8oRJB7qa1jR2L6qJl8DYbnJqkumytURSsWQCF-1EY2OejG-kocTw_R0TJ8zYPrilKBCDyRv1MhMYNZNeGN4NJiosxUlSW8AvpYVsA&__tn__=R]-R&c[0]=AT2LanqjXQ-BPVPj1DJFvbP74MjnrSqvc6r3JWYKwxxa4dRjdRLsDCVRWtEkfPkFm0HyquwCXb_2izhSqfA2Oc_pH28dGal1xTJVE-Y4gEjoStBqn8yY825XrkgDwgEetxLzNULDxGF9zbSQmUBnlJF7ocQlJsztIGxrBok |
| Halcyon:
Instead of posting a long link to some unknown source, it would be better if you downloaded the document and attached it here. Attachments can be up to 4MB. |
| Navigation |
| Message Index |