| General > General Technical Chat |
| Help me identify this tactile switch, please |
| (1/1) |
| alpher:
Here are some pics, bottom line the height of the button is ~25mm or 1", switch is 12x12mm square. Checked the usual places an all I could find were 12mm max height. |
| Twoflower:
To me it looks like a switch with no more than 2mm button with a custom made extension attached to the switch. Edit: It seems I was wrong. The extension caps are usually bigger in diameter. And the friendly Chinese has such long tactile switches. |
| alpher:
You were right actually. The switch is just plain unremarkable one with square 3mm button: Then there is an extension 8x21mm : I don't really care if it's the same switch all I care are dimmensions 12x12x25mm (the height is crucial ). |
| tooki:
The “extension” is a keycap. You might have better luck searching for that term. If it’s just a one-off replacement, just keep the keycap and replace the switch. Check drawings carefully as the square shaft dimensions can vary. |
| kripton2035:
one of the many use of a 3d printer ! |
| Navigation |
| Message Index |