Author Topic: Help with identification  (Read 1921 times)

0 Members and 1 Guest are viewing this topic.

Offline Voodoo 6

  • Regular Contributor
  • *
  • Posts: 54
  • Country: us
Help with identification
« on: August 16, 2016, 12:28:58 am »
Greetings,

Hope I posted in the proper place, This device was in another forum I visit and to date nobody has been able to identify it. I asked the OP there for permission to post it here to ask a wider audience. Information from original post:

Here, listed for your convenience, Everything I can see as far as letters, references, or any other indications that would help identify the unit. All theses indications are on the pictures shown but may be difficult to read.
On the top: PILOT GP ADAPTOR 460V em 38-8 with a little circle with 4 lines at 12 3 6 and 9 hours.
On the back: +DC IN -DC IN GROUND CHASSIS RS232 PIN 1 POWER RESET RS232
On the front: Current Breakers POWER GROUND CHASSIS PILOT and this sign that look like a Yin Yang circle.
No writings on either side neither on the bottom
Inside the unit are a whole lot of electronic including a complex PWM power supply and what looks like a Z80 computer board with the Z80 processor.
I am quite certain this unit a some sort of EEPROM programmer from a UK company (by the spelling of ADAPTOR) but mainly I'd like to identify it so I can retrace the instructions and perhaps software to run it as intended.

Thanks!

 

Offline Voodoo 6

  • Regular Contributor
  • *
  • Posts: 54
  • Country: us
Re: Help with identification
« Reply #1 on: August 17, 2016, 06:43:25 am »
Dave, would you happen to know what this is? I think it is a one off. I am not sure what the protocol is to link to another forum but nobody has been able to identify this. There are high res photos on the original forums. Its an old school forum which I am sure you have run across. I have a 5 dollar PayPal to anyone on the planet who can identify this one.
 

Online CJay

  • Super Contributor
  • ***
  • Posts: 3410
  • Country: gb
  • M0UAW
Re: Help with identification
« Reply #2 on: August 17, 2016, 07:26:03 am »
Pic is too small and internal pics would help an awful lot.

Links to the Hi Res pics if you can't post them here would be useful
M0UAW
 

Offline Voodoo 6

  • Regular Contributor
  • *
  • Posts: 54
  • Country: us
Re: Help with identification
« Reply #3 on: August 17, 2016, 07:41:28 am »
http://forum.nutsvolts.com/viewtopic.php?f=50&t=17447

The thing is you will need to create an account to view the pics which is what i was afraid of. There are like 30 pics in high res. I was not sure of the protocol for exchanging cross forum. 
 

Offline Voodoo 6

  • Regular Contributor
  • *
  • Posts: 54
  • Country: us
Re: Help with identification
« Reply #4 on: August 17, 2016, 08:16:09 am »
Images:
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf