EEVblog Electronics Community Forum

General => General Technical Chat => Topic started by: duskglow on May 26, 2013, 07:37:46 pm

Title: Hi all!
Post by: duskglow on May 26, 2013, 07:37:46 pm
Y'know, while I'm here, why don't I write an introduction post.  This seems like a nice community...

So my name is Russell, I live in the US.  Oregon, to be precise.  I have been interested in electronics since I was seven years old and took apart an old phonograph (much longer ago than I'd like to admit), and it's always been a passion of mine - I can't count the number of electronic things I, umm, didn't turn on.  But I never got any support and wasn't able to actually do anything with it.  So, I ended up going into computers, and chalked myself up as a failure when it came to hardware.  It's not that I wasn't intelligent about it, I just couldn't make the required conceptual leaps.

Until recently, when I found the Arduino (not an Atmel fanboy, just found something that worked for me) and started messing with a lightboard I had, ripping out the controller and making my own.  I reverse engineered it, and actually succeeded (the lightboard works, and I even added a VFD display just for the heck of it and used a MAX232 to level set), and now I realize, hey, maybe I *can* do something with this.  So I decided to start building out a lab and am picking up some equipment, and am trying to make up for lost time with all of the stuff I missed out on.

I kind of miss the old days - when all of the components where through hole and dicking with things like soldering, etc., were in some ways way easier.  These days, I find myself kind of lost with things like SMD soldering/mounting, PCB design, etc.  I really don't even know where to start.  But Dave's blogs are helpful and at least give me a direction to start moving in.  I hope to someday build some cool stuff.  I'll probably never be an honest to $DEITY electronics engineer, but I guess I'll give it my best shot.  Nice to meet you all.
Title: Re: Hi all!
Post by: ebclr on May 31, 2016, 12:35:30 pm
The 1st thing to come to smd world will be a  microscope

http://www.amazon.com/AmScope-SE400X-Professional-Microscope-Magnification/dp/B0056X4RRS?ie=UTF8&colid=3I8VYAYACGS4Q&coliid=I7PYOWSD9GG1I&ref_=wl_it_dp_o_pC_nS_ttl (http://www.amazon.com/AmScope-SE400X-Professional-Microscope-Magnification/dp/B0056X4RRS?ie=UTF8&colid=3I8VYAYACGS4Q&coliid=I7PYOWSD9GG1I&ref_=wl_it_dp_o_pC_nS_ttl)
Title: Re: Hi all!
Post by: AF6LJ on May 31, 2016, 01:58:30 pm
Welcome
Title: Re: Hi all!
Post by: ZeTeX on May 31, 2016, 06:29:19 pm
This post is kinda 3 years old.  :-BROKE