Author Topic: Why is no one working with Allwinner F-Series processors?  (Read 417 times)

0 Members and 1 Guest are viewing this topic.

Offline soFPG

  • Regular Contributor
  • *
  • Posts: 142
  • Country: de
Why is no one working with Allwinner F-Series processors?
« on: March 27, 2019, 08:47:33 pm »
The question of this topic is already in the header but I try to describe my intention a little bit:

I read about some projects which use the Allwinner V3s or A13, but no one really uses the F-Series processors, linux-sunxi even say, that they don't support it (http://linux-sunxi.org/Allwinner_SoC_Family), which is unfortunate.

In my opinion these processors are a great starting point for people who want to get into developing a "System on Chip" - PCB but don't want to deal with high speed interfaces and BGA routing / soldering like one has to with DDR2/DDR3.

For example, the F1C500 (http://www.allwinnertech.com/index.php?c=product&a=index&id=27) has enough hardware on-board (UART, SPI, I2C), is available for 3$ at aliexpress and probably has more processing power than any other microcontroller (like M7 etc.). It has a SDR-RAM interface, there are plenty of TSSOP SDR-RAM chips out there  - so that's nice.

It is also comes in a solderable QFP package.

The only problem I have at the moment: There is only a very short user-manual but no reference-manual (like there is for the V3s) available. So I would like to ask kindly, if anyone here has access to a more detailed description of the processor?

Edit: I know, they are really old chips but still available and not too complex hardware (in my opinion). ARM9 should also support JTAG. I also know, that a closed-source RTOS from Allwinner runs on those chips but I don't think it is available to the public - at least I didn't find anything source-code related.
« Last Edit: March 27, 2019, 08:50:31 pm by soFPG »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf