Author Topic: Identify 3 Pin Connector  (Read 849 times)

0 Members and 1 Guest are viewing this topic.

Offline l0rd_hex

  • Regular Contributor
  • *
  • Posts: 53
  • Country: ca
  • I'm a master of karate and friendship for everyone
Identify 3 Pin Connector
« on: December 21, 2017, 11:52:02 pm »
Hi folks,

Does anyone know the proper name for this style of connector? There are some bayonet lugs on the side. It's from a Topcon SL-7E Slit Lamp.

Thanks!

"I haven't paid taxes in six years, and I'm not getting busted by a damn sandwich." - Benjamin Franklin
 

Offline Tomorokoshi

  • Frequent Contributor
  • **
  • Posts: 854
  • Country: us
Re: Identify 3 Pin Connector
« Reply #1 on: December 22, 2017, 12:31:06 am »
 

Offline BBBbbb

  • Supporter
  • ****
  • Posts: 220
  • Country: cs
Re: Identify 3 Pin Connector
« Reply #2 on: December 22, 2017, 12:45:32 am »
Maybe:

https://www.digikey.com/product-detail/en/hirose-electric-co-ltd/RM15WTPZ-3P-71/H124370-ND/5134382

I might have the service manual or spare parts list somewhere, but won't be able to check before Wednesday.
Measure the diameter, that could help.
 

Offline Halcyon

  • Super Contributor
  • ***
  • Posts: 3914
  • Country: au
Re: Identify 3 Pin Connector
« Reply #3 on: December 22, 2017, 06:46:51 am »
It looks a lot like those 3-pin connectors they use for hand held speaker/mic's on some consumer two-way radios.

http://www.altronics.com.au/p/p0949-3-pin-female-line-microphone-connector/
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 18107
  • Country: nz
  • Taupaki Technologies Ltd. NZ Siglent Distributor
    • Taupaki Technologies Ltd.
Avid Rabid Hobbyist
 

Offline l0rd_hex

  • Regular Contributor
  • *
  • Posts: 53
  • Country: ca
  • I'm a master of karate and friendship for everyone
Re: Identify 3 Pin Connector
« Reply #5 on: December 26, 2017, 06:47:03 am »
Thanks everyone!

I think it might be a Hirose connector, there is a tiny "HR5" printed at the bottom along with a J off to the side (Japan?).

Here's some measurements:

Outer width: 13mm (?)
Inner connector width: 7mm (?)
Height: 6mm (?)



"I haven't paid taxes in six years, and I'm not getting busted by a damn sandwich." - Benjamin Franklin
 

Offline blueskull

  • Supporter
  • ****
  • Posts: 13553
  • Country: cn
  • Power Electronics Guy
Re: Identify 3 Pin Connector
« Reply #6 on: December 26, 2017, 07:48:24 am »
HRS means Hirose, a Japanese connector company.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf