EEVblog Electronics Community Forum
General => General Technical Chat => Topic started by: Hawaka on August 24, 2023, 05:40:21 am
-
Hello,
I have been recently made aware that the EMC emission standard will be extended down to 9kHz instead of the 150kHz. I researched a bit which standard will be impacted and I found that 61000-6-3 is currently on work regarding this. Working group JWG 6 is active on this topic as you can see here:
https://www.iec.ch/ords/f?p=103:14:612416548432972::::FSP_ORG_ID:22022# (https://www.iec.ch/ords/f?p=103:14:612416548432972::::FSP_ORG_ID:22022#)
https://www.iec.ch/dyn/www/f?p=103:23:108506726429685::::FSP_ORG_ID,FSP_LANG_ID:1439,25 (https://www.iec.ch/dyn/www/f?p=103:23:108506726429685::::FSP_ORG_ID,FSP_LANG_ID:1439,25)
https://www.iec.ch/dyn/www/f?p=103:38:108506726429685::::FSP_ORG_ID,FSP_APEX_PAGE,FSP_PROJECT_ID:1439,23,106968 (https://www.iec.ch/dyn/www/f?p=103:38:108506726429685::::FSP_ORG_ID,FSP_APEX_PAGE,FSP_PROJECT_ID:1439,23,106968)
IEC 61000-6-3/AMD1/FRAG2 ED3 is currently at FDIS stage, meaning they are quite close to publish it.
Does any of you have seen this? Any other standard that will be impacted? IMO this could have a big impact on future design as I don’t think they will choose a limit so high that all design work without changes.