General > General Technical Chat
Just launched my Electronic Components Store and need the Communities Guidance
<< < (5/6) > >>
cjuried:

--- Quote from: ledtester on October 16, 2020, 11:15:12 pm ---You have the 74HC14, but I think you should consider stocking the CD4093. You can use the four NAND gates in the 4093 as Schmitt trigger inverters but being NAND gates they lend themselves to more versatile operation.

For instance, here are some collections of 4093-based projects:

https://www.amazon.com/CMOS-Projects-Experiments-Integrated-Investigator-ebook/dp/B009O8KZ6I

https://www.electroschematics.com/tag/4093-circuits/

--- End quote ---

Your right! But I do... https://juriedengineering.com/products/cd4093be-cd4093-cmos-quad-2-input-nand-schmitt-triggers-1?_pos=1&_sid=f90c18724&_ss=r
coppercone2:
perhaps a glass tube fuse will not be shipped in a kilogram of ESD safe plastic. Acceptable for anyone but the atomic energy commission. Perhaps the plating can be violated by a strong shock and cause corrosion, reducing the life time of a part, but it will likely exceed 10 estate sales before the damage can propagate, causing a switch replacement to occur in Neo Silicon Valley II hobby garage.

It makes me wonder if that is a thing, worrying about ESD discharge on connectors and electromechanical devices. It does seem like a complete solution but how much waste is attributed to it?
cjuried:

--- Quote from: coppercone2 on October 17, 2020, 03:47:21 am ---perhaps a glass tube fuse will not be shipped in a kilogram of ESD safe plastic. Acceptable for anyone but the atomic energy commission. Perhaps the plating can be violated by a strong shock and cause corrosion, reducing the life time of a part, but it will likely exceed 10 estate sales before the damage can propagate, causing a switch replacement to occur in Neo Silicon Valley II hobby garage.

It makes me wonder if that is a thing, worrying about ESD discharge on connectors and electromechanical devices. It does seem like a complete solution but how much waste is attributed to it?

--- End quote ---

Hey, what can I say, were over-achievers here.  ;) 55% done with removal of shipping!
cjuried:
Some 16 hrs later........ Everything has been repriced.  |O
tpowell1830:

--- Quote from: cjuried on October 16, 2020, 10:41:18 pm ---
--- Quote from: tpowell1830 on October 16, 2020, 10:16:55 pm ---I believe that shipping should be calculated at checkout based on all items and not included in price, for my 2 cents.

Otherwise, I checked out your site and have thoughts on that as well. I tried searching for 1000 uF electrolytic capacitor, 1000 uF capacitor and got resistors as result ( I need to order some 1000 uF caps). Also, from a website perspective, you never want to put your phone number, 954) 300-905, in plain text because you will get inundated with scams and cold sales calls. The phone number should be a bitmap or jpeg. Robots are looking for phone numbers by the millions. Also, if you intend to sell worldwide, you need to add your country code to phone number (such as 1-(954) 300-905).

Just my 2 cents...

--- End quote ---

Ahh, yes, another good point. I will make this changes!

--- End quote ---

I just want to be clear, I want you to be successful at your enterprise, so I am being honest about my observations.
I see you changed the phone number, but it is still text, good luck with the robots. Also, the search really sucks if all I can search for is "capacitors" and not zero in such as "electrolytic" or "1000 uF". As I mentioned before, this search does not work at all on your site.

One of the most important aspects of running a business is to listen to your customers. You skimmed over my previous comment and only saw the phone number observation. I would have been a customer if I could have found the item in search.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod