General > General Technical Chat
LED replacement T8 tubes
Zero999:
It states in the data sheet it will work with, or without a magnetic ballast, but not with an electronic ballast.
Northy:
Thanks for the replies.
It seems the tube isn't goosed, it had just come out a little. It's a bit 'floppy', it might need a cable-tie or something round it.
G
james_s:
--- Quote from: Zero999 on November 29, 2020, 06:22:10 pm ---It states in the data sheet it will work with, or without a magnetic ballast, but not with an electronic ballast.
--- End quote ---
Just below that it says that powering it directly is recommended.
I interpreted "do not modify the fitting" as "if installation requires messing with the wiring in the fixture don't do that yourself, hire an electrician" not "the fitting should never be modified under any circumstances". I suspect it's just a liability thing.
Navigation
[0] Message Index
[*] Previous page
Go to full version