Author Topic: Looking for info on these Microsystem International Limited chips I acquired  (Read 224 times)

0 Members and 1 Guest are viewing this topic.

Offline zaphod betamaxTopic starter

  • Newbie
  • Posts: 2
  • Country: ca
Although there are various other chips I have identified on this smorgasbord of old 70s chips
I can not get any info on the two sets of chips labelled ML741M and ML747M.
It is possible the 747s are dual op amps, and if the 741 is indeed a 741 I have never in my journey came across a 14 pin variant.

My awareness on these is open to suggestions.

If you can help let me know: what Would really excite me is to find the pinout for these MIL chips so I could breadboard and test them!

**These came on this stryrofoam, I did not put them there. If it was up to me I would have them on anti-static foam like
the other CD40xxAs (not pictured) but came on thick antistatic foam.
« Last Edit: March 25, 2024, 11:39:53 pm by zaphod betamax »
 

Online dobsonr741

  • Frequent Contributor
  • **
  • Posts: 674
  • Country: us
 
The following users thanked this post: zaphod betamax

Offline sarahMCML

  • Regular Contributor
  • *
  • Posts: 71
  • Country: gb
If you look up some of the older TI datasheets you'll find both the 14 pin 741 and its dual, the 747 pinouts and specifications. I have a few of those gold ones myself, and some TO cased 741's.
 
The following users thanked this post: zaphod betamax

Offline zaphod betamaxTopic starter

  • Newbie
  • Posts: 2
  • Country: ca
Thanks for all the help!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf