| General > General Technical Chat |
| Looking for obscure Hirose PCMCIA 68-pin card connector - NX30H-68P |
| (1/1) |
| peter-h:
I believe that is the right P/N. I am after the mating plug for the above connector. Or even a ribbon cable with the plug on it, which connects to all the pins. Just a one-off. It is listed at various places but nobody stocks it. Many thanks in advance for any pointers. |
| peter-h:
It occurred to me that I can get a little PCB from some cheap chinese shop, which (if the thickness is right) will just push into that connector :) |
| peter-h:
Final update: I found someone making a cable to plug into the card but it is about £400, so in an hour I did a PCB and for $30 got JLCPCB to make it. Gold plated. It is a very expensive ARINC429 card (4x IN 4x OUT, from MAXT) which I picked up on Ebay for €150. I don't even know if it works and neither did the seller. I suspect it listed at several k $. |
| Navigation |
| Message Index |