Author Topic: The 23,473rd Name That Connector Thread..  (Read 319 times)

0 Members and 1 Guest are viewing this topic.

Offline LaserSteveTopic starter

  • Super Contributor
  • ***
  • Posts: 1354
  • Country: us
The 23,473rd Name That Connector Thread..
« on: December 05, 2024, 03:11:00 pm »
Posting these for a friend.,...

What Are They?
"When in doubt, check the Byte order of the Communications Protocol, By Hand, On an Oscilloscope"

Quote from a co-inventor of the PLC, whom i had the honor of working with recently.
 

Offline tom66

  • Super Contributor
  • ***
  • Posts: 7238
  • Country: gb
  • Electronics Hobbyist & FPGA/Embedded Systems EE
Re: The 23,473rd Name That Connector Thread..
« Reply #1 on: December 05, 2024, 03:17:03 pm »
They are some form of FPC connector.  Measure the pitch of the pins and the thickness of FPC that will be accepted (you can try folding a piece of paper to make a rough estimate).
 
The following users thanked this post: LaserSteve

Offline LaserSteveTopic starter

  • Super Contributor
  • ***
  • Posts: 1354
  • Country: us
Re: The 23,473rd Name That Connector Thread..
« Reply #2 on: December 05, 2024, 04:50:20 pm »
The small one with the latch is the one of main interest...

Thanks,

Steve
"When in doubt, check the Byte order of the Communications Protocol, By Hand, On an Oscilloscope"

Quote from a co-inventor of the PLC, whom i had the honor of working with recently.
 

Offline LaserSteveTopic starter

  • Super Contributor
  • ***
  • Posts: 1354
  • Country: us
Re: The 23,473rd Name That Connector Thread..
« Reply #3 on: December 06, 2024, 03:48:29 pm »
Tom, Thank you for your help.

Steve
"When in doubt, check the Byte order of the Communications Protocol, By Hand, On an Oscilloscope"

Quote from a co-inventor of the PLC, whom i had the honor of working with recently.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf