Author Topic: Mystery Part TO92 marked 2T011  (Read 447 times)

0 Members and 1 Guest are viewing this topic.

Offline charliedelta

  • Regular Contributor
  • *
  • Posts: 63
  • Country: ca
Mystery Part TO92 marked 2T011
« on: June 14, 2021, 09:47:56 am »
Trying to find out what the specification are of this part marked 2T011 or maybe 2to11.
Its in a TO-92 package.

I did search everywhere, no hits?

Anyone have any clues. It's in a USA manufactured Ultrasonic leak detector.
Lots of 2n2926's on the board marked in Yellow and Green so its very early vintage.

Thanks
 

Online exe

  • Supporter
  • ****
  • Posts: 2329
  • Country: nl
  • self-educated hobbyist
Re: Mystery Part TO92 marked 2T011
« Reply #1 on: June 14, 2021, 10:04:59 am »
Do you have a picture of the board and picture of the part?
 

Offline charliedelta

  • Regular Contributor
  • *
  • Posts: 63
  • Country: ca
Re: Mystery Part TO92 marked 2T011
« Reply #2 on: June 16, 2021, 08:35:36 am »
Yes I do see attached. The device behind it is the same one with the same markings.
 

Online exe

  • Supporter
  • ****
  • Posts: 2329
  • Country: nl
  • self-educated hobbyist
Re: Mystery Part TO92 marked 2T011
« Reply #3 on: June 16, 2021, 12:54:57 pm »
I'd desolder one of these and put into a transistor tester. This at least will give some info.

My best guess it's a pnp bjt, but not sure which one.
 

Offline charliedelta

  • Regular Contributor
  • *
  • Posts: 63
  • Country: ca
Re: Mystery Part TO92 marked 2T011
« Reply #4 on: July 03, 2021, 09:43:31 am »
I pulled the part.

BJT PNP Hfe 215, Ube 693 and Ic 6.2MA on the chinese transistor analyzer.

A BC557 might be a close match, but I have not looked for match exhaustively.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf