Author Topic: New Member, Please introduce yourself  (Read 1207189 times)

0 Members and 2 Guests are viewing this topic.

Offline lxmute

  • Contributor
  • Posts: 15
  • Country: fr
Re: New Member, Please introduce yourself
« Reply #2875 on: June 04, 2022, 12:06:44 am »
Hello,

Alex there, Briton from Bretagne/Brittany. Owned 8bits then 16/32bits mighty Amiga.
I've studied maths and physics at University level long ago gathering some diplomas. Then I switched to computer science.
I'm a Unix developer, sysadmin. I'm fluent in a few languages, C, C#, PERL, PHP, JAVA, playing with sensors and databases. I'm curious about electronics trying to go deeper for quite a few years.
I'm here to request for help about a big electrical problem hammering badly my life atm.
I stay positive.
cheers.

Alex
 

Offline kora

  • Contributor
  • Posts: 5
  • Country: ua
    • Globar LLC
Re: New Member, Please introduce yourself
« Reply #2876 on: June 04, 2022, 04:18:21 am »
I am Sergey, from Ukraine, former Motorola SE (systems engineer) since 1992. Will be happy to help in field of telecom, radio, any trunking systems (SmartZome, Astro, P25 etc.). Skype: kora007 .

//kora
 

Offline ppeatman

  • Newbie
  • Posts: 2
  • Country: nl
Re: New Member, Please introduce yourself
« Reply #2877 on: June 14, 2022, 08:49:33 am »
Hi guys & girls,

I'm Peter (65) from the Netherlands. Long ago, I graduated from the Delft University of Technology in Electrical Engineering. Since then, I mostly worked in telecommunications, software developement, mathematics. Now that I'm getting closer to my retirement, it's time to pick up and refresh my good-old hardware hacking skills :-)
 

Offline TomKatt

  • Contributor
  • Posts: 29
  • Country: us
Re: New Member, Please introduce yourself
« Reply #2878 on: June 27, 2022, 04:00:07 pm »
Greetings all - I'm Tom from Vermont in the USA.   I do IT for a living and to support my electronics hobby.  Started out with a Radio Shack 100-in-1 kit back in the 70's and have taken apart more gadgets than I have put back together.  I have a perverse kink for clocks of all kinds and equally appreciate all electrons, whether they be electromechanically derived or silicon in a microcontroller.

Long time EEVblog viewer, just signed up to the forum today.   This place looks like it has a LOT of smart folks with good ideas, and I'm eager to learn.

Thanks!
 

Offline dermotkirk7

  • Newbie
  • Posts: 3
  • Country: gb
Re: New Member, Please introduce yourself
« Reply #2879 on: July 03, 2022, 12:09:48 am »
Hi

I’m Dermot I don’t have any qualifications to list but like to believe I have a strong understanding of electronics mostly in the automotive industry
 

Offline makingdevices

  • Newbie
  • Posts: 4
  • Country: es
Re: New Member, Please introduce yourself
« Reply #2880 on: August 02, 2022, 07:10:23 pm »
Hello there!

Here Rubén, I am an Electronics & Automation engineer from Spain who also studied a master's programme in Energy in Denmark. On top of that, I am currently an R&D Engineer in the field of EV (More precisely: Off-Board and On-Board chargers for some tier1 automotive brands).

However, my passion is embedded electronics and microcontrollers, which I don't have the luck to work with, so I kinda funded Making Devices, a small blog/IG account to share my personal projects on this topic and grow my knowledge about this field.

Thanks!
 

Offline Fanap

  • Newbie
  • Posts: 2
  • Country: us
Re: New Member, Please introduce yourself
« Reply #2881 on: August 23, 2022, 09:24:05 am »
Hi Everyone,
Looking for work in electronics field. I hope I can make useful contributions here.
 

Offline Rockwells

  • Newbie
  • Posts: 2
  • Country: us
Re: New Member, Please introduce yourself
« Reply #2882 on: August 23, 2022, 04:19:44 pm »
Hello
I'm a software engineer who is interested in getting into hardware.
Thanks

Offline Keri Szafir

  • Contributor
  • Posts: 10
  • Country: pl
  • Vacuum Tube Witch
    • instagram
Re: New Member, Please introduce yourself
« Reply #2883 on: August 23, 2022, 04:53:56 pm »
Hello there, kitties - I'm Keri, the vacuum tube witch :)
Doing stuff in my lab, nerding out, being snarky here and there. Not formally an electronic engineer, but I know a thing or two, and got two decades of experience doing the stuff.
I'm way better at hardware than software/firmware.

I'm not that good at introducing myself, so please, bear with me. 36 year old, born and living in Poland, tried to study electronic engineering but failed my maths and physics exams, then graduated chemistry, but have been doing electronics almost all my life. Mostly audio gear repairs, but I can design some cool stuff, like a Monotype composition caster controller based on a Raspberry Pi, or a scalable GoPro Hero3+ synchronized shutter release system, a X-Y scope with a built-in sine wave oscillator and electronic part signature tracer, or an advanced version of a community vacuum tube meter project.

I learned electronics when I was a teen in the '90s, first by playing with my brother's old Soviet "Elektronika" circuit building kit, then by taking apart devices, desoldering them and reusing the parts in projects: multivibrators, power supplies, motor controls etc., all discrete, no ICs let alone microcontrollers. They were too expensive... speaking of which, my budget is tighter than Ethel Granger's laces and I rarely can afford parts I would like to use, that's why I can build a time circuit control chip out of vacuum tubes... Just kidding.

I've always had a knack for analog electronics more than digital, mainly audio and to some extent test gear stuff. I started restoring & modding vintage gear and building vacuum tube amps in early 2000s, inspired by the Fallout video game series and its aesthetic ('50s/'60s Cold War and space era electronics) which vastly influenced the way I build stuff: cable looming, rackmount enclosures, lots of knobs and other controls etc. My favorite technique is point-to-point or tagboards, but I can do PCB if I really need to, and learned SMT pretty recently. Definitely not my favorite to service, it's just too teeny tiny for my shaking hands.

I love doing measurements with vintage gear too (analog scopes, generators, meters etc.) - in fact, I wish I hadn't sold my old ZRK OS102 tube scope that was the first real deal scope in my lab in 2000s. Same with a ZRK M3401SD reel-to-reel tape machine... I needed money though. Capitalism, meh.

Back in 2000s I visited a lot of electronics repair shops, sometimes bought vintage parts, sometimes got some stuff for free (see, it was obsolete to them, taking up space and all that), and I regret not being able to buy as many tubes as I wanted back then when they were relatively cheap. I kept on repairing and building gear, got to know a few guitarists and tinkerers, made amps for them, made amps for myself, took these devices apart and reused the parts in new projects... Life goes on. I volunteered and worked at some places, but nothing beats doing stuff in my own little lab. It's not really a business, my income is way too low to even consider registering as the running costs would eat me right away - I'm abysmal at life management skills, given that I'm on the autism spectrum, probably ADHD as well, overstressed and burnt out, dealing with huge imposter syndrome, got a fair deal of mental health issues with no real access to support systems. Oh, and I'm a trans woman, so more minority stress, yay.

At this point in my life, I live in a relationship of three, it takes pretty much time so I can't devote it all to my work. I'm seeing the pandemic of workaholism all over the world, particularly here in Poland or in the States. It's so toxic... people working their asses off and still not getting anything, let alone becoming wealthy. But I'm not here to rant about poly-ticks (poly being many, and ticks are bloodsucking creatures).

All your vacuum tube amplifier are belong to me :D
« Last Edit: August 23, 2022, 05:22:20 pm by Keri Szafir »
...its loveliness increases, it will never pass into nothingness

https://www.youtube.com/KeriSzafir
 

Offline Apix

  • Newbie
  • Posts: 2
  • Country: it
Re: New Member, Please introduce yourself
« Reply #2884 on: September 06, 2022, 07:23:22 am »
Hi there! I'm Andrea, I'm an Electronics Engineer from Italy. I'm 32 years old. I've been an hardware engineer for 5 years and 2 years as a firmware engineer, that's what I do at the moment.
I really like working on some projects of mine as an hobbyist.
 

Offline AzGuy

  • Contributor
  • Posts: 7
  • Country: us
Re: New Member, Please introduce yourself
« Reply #2885 on: September 10, 2022, 09:57:36 pm »
Hi everyone! Greetings from sunny/hot Arizona-USA. I just joined.
I've been in the electronics-based industry for many years. Previous Motorola/Freescale employee. Doing IC Layout since 2006. Bench tech. for a few years. Kinda edged into semi-retirement when the company sold. Right now I have the most important job of my life: taking care of my wife.
I enjoy fixing things. I don't care what it is, I'll make a valiant effort to fix it. This is 1 reason why I'm here. On occasion, one needs help, advice, a schematic, etc.
I'm looking forward to exciting future reads and helpful information.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf