General > General Technical Chat
PC1602K-P9 LCD pinout
jdev99:
Can any body help me with the pinout for this display please?
It is a "POWERTIP" PC1602K-P9 module (16x2 characters), based on a S6A0069 controller, which is similar to the HD44780.
It is from an old network switch
I traced out what I can, see attached schematic and photos.
Thank you for any assistance.
amyk:
If you have the device it came from, and a scope or logic analyser, you can find out the remaining pins. It's probably being used in 4-bit mode judging by the number of pins left over on your schematic.
kjr18:
Hi, I found this datasheet, it might be what you're looking for: datasheet link here.
jdev99:
That is the one, thank you very much. :-+ :)
How did you find it, if I may ask?
kjr18:
First I tried searching for "pc1602k-p9" then on images I found some photos from this page. Last post contains dead link to datasheet, but provides another parts number that shows what you look for.
Navigation
[0] Message Index
[#] Next page
Go to full version