Author Topic: Planning to purchase my first DSO  (Read 4487 times)

0 Members and 1 Guest are viewing this topic.

Offline ben1066

  • Contributor
  • Posts: 25
  • Country: gb
Planning to purchase my first DSO
« on: December 03, 2011, 02:22:21 pm »
Hello,
I've noticed these forums have a lot of advice about DSO's. I'm looking to buy a DSO, for around £300 (GBP) and the Rigol seems decent. The Rigol is however quite old and I wondered if there was anything better by now. Please bare in mind that if I have to import something I am subject to 20% VAT. Thanks.
 

Offline sairon

  • Contributor
  • Posts: 13
  • Country: cz
Re: Planning to purchase my first DSO
« Reply #1 on: December 03, 2011, 03:17:55 pm »
I had pretty same problem, read my topic and rf-loop's answers here, it could help: https://www.eevblog.com/forum/index.php?topic=5728.0
Finally I decided to buy Owon, the price was same as price of Rigol in my country (when bought from a local dealer with local warranty and VAT).
 

Offline SoftwareSamurai

  • Regular Contributor
  • *
  • Posts: 170
  • Country: us
Re: Planning to purchase my first DSO
« Reply #2 on: December 03, 2011, 03:30:12 pm »
I recommend that you don't go for the cheapest DSO, but rather choose one that's got the best value for the money. What that means is that you'll probably spend a lot more than you want right now for a decent DSO, but you'll be better off in the long run.

As an example, recently my old 20 MHz scope died, and I went looking for a replacement hoping to spend less than $150 USD. Much to my surprise (and IMHO), anything less than $500 USD is just plain cheap. I ended up settling for the Tekway DST1102B for ~$640 USD. Now that's a 100 MHz DSO - far above what I needed. But with this better tool, I can do a lot more than before, which has paid off in that now I can work on higher-end electronics. (FYI: The DST1102B is even cheaper today.)
 

Offline SoftwareSamurai

  • Regular Contributor
  • *
  • Posts: 170
  • Country: us
Re: Planning to purchase my first DSO
« Reply #3 on: December 03, 2011, 03:38:44 pm »
Finally I decided to buy Owon, the price was same as price of Rigol in my country (when bought from a local dealer with local warranty and VAT).
Yeah, after comparing the Owon SDS7102 to the Tekway DST1102B, I have to say that today I'd probably go for the Owon, especially since their prices are about the same.
(Then again, I love to hack my Tekway DSO!)
 

vlf3

  • Guest
Re: Planning to purchase my first DSO
« Reply #4 on: December 03, 2011, 04:18:11 pm »
I am in the same situation, with living area down sizing over a number of years to date, had to make some radical changes to my workshop area.  With the demise of a CRO tube, frequency up to 50Mhz just, I decided to take a long look around the market on-line... to cut this story short; I focused on China and Europe who for the price, had a band-width to price, within my budget.

ATTEN (note, not shouting), trade name in test equipment and oscilloscopes, is a Chinese manufacture... they had a 100 MHz ADS1102CML 7inch display, 3.5ns rise and 1GS/s, with 1-Mpts & 2-Mpts Memory depth, depending on Two or One Y-Channels running, and 2mV sens input per channel with frequency and amplitude measurements plus, other bells and whistles like FFT.

My assumption from multiple searching on this scope range was, it's an end of line product ! and eBay UK has many Chinese suppliers willing to sell-off ATTEN range of these scopes; for the sum of US$525 = GBP £348.29 decided to purchase, and will await to see if have got a deal or not ?... to me this scope looks like the RIGOL in the small 5.7 inch display, it's possibly from ATTEN as the OEM manufacture, the controls and push buttons have similar layout, but here I am speculating.

For those who might be interested see below...

URL for E-Bay UK and scope #:  http://www.ebay.com/itm/New-Atten-ADS1102CML-100Mhz-Digital-Storage-Oscilloscope-7-LCD-/260894441196?pt=LH_DefaultDomain_0&hash=item3cbe853eec

Regards, vlf3.
 

Offline ben1066

  • Contributor
  • Posts: 25
  • Country: gb
Re: Planning to purchase my first DSO
« Reply #5 on: December 03, 2011, 07:27:40 pm »
Hm, the Atten scope seems nice, albeit more expensive than I want to pay, £335+VAT at least.

I really would love to go with the Hantek/Tekway scope however my budget simply doesn't allow for it. I can't afford much more than £300 really. If I was in the US with no VAT, I might of been able to afford it but VAT in the UK kills :(
« Last Edit: December 03, 2011, 07:40:52 pm by ben1066 »
 

Offline Bored@Work

  • Super Contributor
  • ***
  • Posts: 3932
  • Country: 00
Re: Planning to purchase my first DSO
« Reply #6 on: December 03, 2011, 08:18:33 pm »
Hm, the Atten scope seems nice, albeit more expensive than I want to pay, £335+VAT at least.
It is not very nice, but you can get it much cheaper http://www.ebay.co.uk/itm/150620675417
£229.00+ whatever your government wants to have.
I delete PMs unread. If you have something to say, say it in public.
For all else: Profile->[Modify Profile]Buddies/Ignore List->Edit Ignore List
 

Offline ben1066

  • Contributor
  • Posts: 25
  • Country: gb
Re: Planning to purchase my first DSO
« Reply #7 on: December 03, 2011, 08:30:36 pm »
Thats a different model, afaik it has less sample memory?
 

vlf3

  • Guest
Re: Planning to purchase my first DSO
« Reply #8 on: December 03, 2011, 11:15:46 pm »
 ::) Yep that's the problem, you pay for the Memory Depth... by looking around the web, and if your not to bothered about the max end of it's band-width for true wave-form representation, then a lower Memory Depth will do, thus it's price drops.

However, the smaller display 5.6 inch model: ATTEN ADS1102CA is 100 MHz, and same as the ADS1102CML display 7 inch but,
total cost with shipping to UK US$363 = £232.68... see URL:

http://www.ebay.com/itm/ATTEN-ADS1102CA-Storage-Digital-Oscilloscope-100MHz-1G-/250815305844?pt=BI_Oscilloscopes&hash=item3a65c1d874

Just made a quick calculation based on UK £233 and UK VAT, rate totals £279.60   ;)
« Last Edit: December 03, 2011, 11:49:12 pm by vlf3 »
 

Offline rf-loop

  • Super Contributor
  • ***
  • Posts: 3248
  • Country: cn
  • Born with DLL21 in hand
Re: Planning to purchase my first DSO
« Reply #9 on: December 04, 2011, 07:33:53 am »
And starting with GPB265 + your country import tax etc you can get Owon SDS7102
(it was lowest eBay price what I find now and including shipping)

It have 10M (and 2 channel use 10M + 10M) full speed capture memory.
It means full realtime 1Gs/s from 500us/div to 2ns/div with single channel.
With 2 channel it give 500Ms/s to both channels from 1ms/div to 2ns/div.
It have not interleavaed ADC. (ADC quality is better)
It have 800x600 TFT

If some have warranty time fail, just simply ask Owon RMA prosedure.
It have best signal capturing quality what I have seen in this price class. I want see what name first beat it.
Scope design is much more advanced than this what use Rigol, Atten, Siglent "old" pure FPGA scopes.
Owon is not "copycat" manufacturer as most of this price class manufacturers.
I have here Owon what is 100MHz but it can name  200MHz  very clearly if look how others work.
Atten +- 3dB (6dB) promise for  0-100MHz is just fun.
If practice and theory is not equal it tells that used application of theory is wrong or the theory itself is wrong.
-
Harmony OS
 

vlf3

  • Guest
Re: Planning to purchase my first DSO
« Reply #10 on: December 04, 2011, 11:27:09 am »
Interesting post rf-loop; until I receive the ATTEN ADS1102CML scope, and based on their primary web-site pdf spec down-load, this model looked good for the price.  After days of searching around, the Chinese suppliers was the best deal, and found no advantage in the warranty period between Europe supplier and China... living in Jersey Channel Islands, we now have too pay GST a bit like UK VAT, so overall cost is an issue; however the Owon scope model ? would be interesting to look further into.

I guess we all take a chance when buying new equipment, at least this forum has the required experience world-wide from  other members like yourself, where any information is much appreciated.
 

Offline ben1066

  • Contributor
  • Posts: 25
  • Country: gb
Re: Planning to purchase my first DSO
« Reply #11 on: December 04, 2011, 11:38:33 am »
The owon looks good on paper but the firmware looks, terrible. From what I've seen it's hard to use and unoptimised. Can anyone give any other views on this?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf