General > General Technical Chat

Pronunciation of "via(s)"

<< < (3/17) > >>

tooki:

--- Quote from: Zero999 on October 15, 2020, 06:30:05 pm ---
--- Quote from: tooki on October 15, 2020, 06:18:07 pm ---
--- Quote from: ledtester on October 15, 2020, 02:49:18 pm ---Either of these ways is fine even in the US:

https://youtu.be/gvYxxY43W9Q

--- End quote ---
Goodness, she's scary. They might have been wiser to just use an audio-only recording! :P

--- End quote ---
No emotion. Is she real, or a bot?

--- End quote ---
I feel like there is emotion in that death stare!

tooki:

--- Quote from: SiliconWizard on October 15, 2020, 06:45:02 pm ---
--- Quote from: tooki on October 15, 2020, 06:16:18 pm ---
--- Quote from: SpecialK on October 15, 2020, 02:22:17 pm ---Sometimes pronounced "plated through-hole"

--- End quote ---
"Plated through-hole" and "via" are not synonyms. PTHs are plated holes through which you insert a component lead; vias are plated holes through which component leads are not placed.

--- End quote ---

That's right. Besides, conversely, not *all* vias are PTH. Blind and buried vias are *not* through-holes at all. :)

--- End quote ---
I should have remembered that fact, given that just 2 weeks ago, I spun a PCB with hundreds of tented vias (since I needed the silkscreen to be legible for the kids who'll be assembling the kits — on the prior version, the via stitching left the silkscreen looking rather moth-eaten). Altium defaults to open vias, so changing them to tented was an extra step I had to do explicitly.

Someone:

--- Quote from: Zero999 on October 15, 2020, 06:30:05 pm ---
--- Quote from: tooki on October 15, 2020, 06:18:07 pm ---
--- Quote from: ledtester on October 15, 2020, 02:49:18 pm ---Either of these ways is fine even in the US:

https://youtu.be/gvYxxY43W9Q

--- End quote ---
Goodness, she's scary. They might have been wiser to just use an audio-only recording! :P

--- End quote ---
No emotion. Is she real, or a bot?

Yes, I've heard both pronunciations before.

--- End quote ---
Hair physics too detailed to be a bot....

notsob:

so now pronounce "viaduct"

eti:
Whilst we're discussing this, let's go for:

"GIF": there's no "discussion" for this, it's an acronym of "Graphics Interchange Format" - the first letter of "GIF" is therefore going to be, phonetically sounded as  "Guh" and not "Juh", as it's only a moron who thinks that you'd pronounce "Graphics" as "Jraphics"  :palm:

Yeah I know it's very tired, that debate. Logic wins over "opinion" though.

There's others, but I've no inclination to digress further.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod