what do you guys think of flukes 179 model is it a good multimeter for small electrical stuff/industrial?
It doesn't have data logging, so doesn't meet your original specs, but it's an excellent quality general purpose meter. Very nice ergonomics, Fluke ruggedness, fast-reading bargraph, backlight, latching continuity beep, quality safe protection circuitry, lifetime Fluke warranty. I've owned one and used it for about 3 years. The next serious step up in Fluke's lineup would probably be an 87-V.
One nice thing about a 179 that you won't find in most data logging meters is that the 179 has very long battery life. A single ordinary 9V transistor radio battery will power it for 200 hours, and with its auto-off circuitry, that works out to well more than a year of my occasional use. You won't find that kind of battery life on most OLED displays or most graphical matrix displays. And the 179's backlit LCD display is extremely readable under a wide variety of conditions, better than most graphical matrix displays, but not as pretty as OLED. This characteristic of long battery life and good display readability isn't unique to the 179, it's mostly a characteristic of the conventional segmented LCD display.
Compared to the 87-V, the 179 lacks a microamp range, but the microamp range on the 87-V has such high impedance (burden voltage) that it's not good for much in general electronics work anyway. It's good for appliance technicians when they need to diagnose flame detection circuits in gas burning appliances, though. For general electronics microamps, one of Dave's microcurrent adapters is better than any general purpose multimeter's microamp range.
The 179 also lacks the low-pass filtering of the 87-V, which would be useful for industrial motor drives, but I don't work with those.
The 179 is probably more than most people would need for school, but it's a durable high quality instrument that will serve you well for a very long time.