Author Topic: Redundant traces in the PCB board design  (Read 845 times)

0 Members and 1 Guest are viewing this topic.

Offline Rama nayak

  • Newbie
  • Posts: 1
  • Country: in
Redundant traces in the PCB board design
« on: June 26, 2017, 09:15:40 pm »
Hi.. I have checked the PCB board of the ucurrent GOLD in Altium. There appears to be traces on the bottom layer going out to 4 corners of the board (e.g. traces from VGND, V-,B+). What is the purpose of these traces? They are not connected to any component.
 

Offline thm_w

  • Super Contributor
  • ***
  • Posts: 2141
  • Country: ca
Re: Redundant traces in the PCB board design
« Reply #1 on: June 26, 2017, 09:26:25 pm »
Should be in one of these:




used for speeding up production testing.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf