General > General Technical Chat
Review: Hantek DDS 3X25. Anyone own one?
<< < (59/108) > >>
marmad:

--- Quote ---well, for unsynchronized signal, try freq greater than 1MHz, all freq below that are in-synch (or almost) whether you use or not the "stable synch code"
--- End quote ---

Well, as mentioned, the .pngs are just a tiny capture from a long glitch-free sweep using the 4000/10 parameters - but it doesn't matter about the frequency, because whatever behavior you see in the .png is what the particular output (MPL05 - or - DO11 - or - Sync Out) is doing the entire sweep.

I posted .pngs awhile ago of DO11 being stable at 3.3MHz (i.e. other frequencies that have an unstable Sync Out); so it's handier for me to use that as Sync Out with simple waveforms, so that I can use almost any frequency the device can output - as opposed to only frequencies that are: points/periods = integer.  So I am making a hardware switch to that end  :)


--- Quote ---can you PM or link somewhere to me? the display should looks like in help file.
--- End quote ---

Sorry, maybe my description was not good.  See attached .png of the GolTek running on my desktop.
Mechatrommer:

--- Quote from: marmad on August 09, 2011, 02:20:00 pm ---I posted .pngs awhile ago of DO11 being stable at 3.3MHz (i.e. other frequencies that have an unstable Sync Out);

--- End quote ---
how could i forget that! your message is not suitable for people with lack of sleep like me. urghh!


--- Quote from: marmad on August 09, 2011, 02:20:00 pm ---Sorry, maybe my description was not good.  See attached .png of the GolTek running on my desktop.

--- End quote ---
shoot! i forgot to include some files (region files *.rgn) here attached is quick fix for you. just extract into the goltek app folder and restart and tell me how it goes. that white border should dissapear and when you move the window it should leave some gap at the bottom of your screen. which on my screen just nicely sit on my taskbar. but i can see your dont have. i've updated the file in my site. thanx for pointing my careless mistake.
torch:
Unfortunately, the skin is rather garbled on my display (1920 x 1200, 32 bit) and I seem to get some rather random results clicking on controls!

See attached screen shot.

I'll try to play with it a bit more when I get home.
marmad:

--- Quote ---how could i forget that! your message is not suitable for people with lack of sleep like me. urghh!
--- End quote ---

One problem is that we're located 6 hours apart in time  ;)


--- Quote ---just extract into the goltek app folder and restart and tell me how it goes.
--- End quote ---

Yep, that fixed it for me... thanks!
Mechatrommer:

--- Quote from: torch on August 09, 2011, 06:14:00 pm ---Unfortunately, the skin is rather garbled on my display (1920 x 1200, 32 bit) and I seem to get some rather random results clicking on controls!
I'll try to play with it a bit more when I get home.

--- End quote ---
thats very bad! have you tried changing screen resolution? try removing *.rgn files and see what happened? using keyboard key instead of mouse click etc. but still thats very bad. give me time to figure out, i never see such a thing my entire life. until further investigation, sorry it happened to you.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod