General > General Technical Chat
Review: Hantek DDS 3X25. Anyone own one?
<< < (66/108) > >>
Mechatrommer:

--- Quote from: EdoNork on August 31, 2011, 07:57:57 pm ---Sorry for a "thank you" only post.
--- End quote ---
apologize accepted :D

at msraya, do you really need 4 channel? and hence opt for usb dso (3064)? why dont get a proper dso with screen and control. or at least Hantek DSO8060 60MHz Five-in-one Handheld Oscilloscope. it got 3x25 generator (i believe), dso, multimeter (not to mention monitor and controls and handheld"ness") in one package for the price just a little bit higher than a proper low end dso alone or your suggested usb hantek 3064 oscilloscope. but if you split the price, you can average about $100+ only for each functionality. which is what i pay for the hantek 3x25 alone. if i'm looking for a generator and a scope, (with multimeter as a bonus) i may want to look at this unit. i've made a post on this sometime ago but i believe its lost in space. and since you are educating young people, in my opinion, its better not just teach the functionality, but the working with the real device interface (monitor or graticule, buttons, knobs, cabling etc), usb device only for budget limited or another alternative for people/hobbiest (or Uni?), recommending (promoting) it as real device is not a good idea... in my humble opinion.

http://cgi.ebay.com.my/Hantek-5in1-Handheld-Scopemeter-DMM-DSO-AWG-DSO8060-60M-/260839953809?pt=BI_Oscilloscopes&hash=item3cbb45d591
msraya:
Thank You Again, Mechatrommer. I dont know all chinese oscilloscope, I am getting the picture, HI.

In my desk, I have a old Instek GDS-820C, 150MHz wich I use all day and I want to replace. For my home and my project I  need more chanels more depth memory and MATLAB conection, then I think in the Hantek 3064A, but then I re-think than I could need more bandwith in lieu of more channels... The new OWON SDS8202 atract my attention at twice 3064A cost, 650eur, but I not find review of the more interesting OWON MSO8202T wich is also expensive for my hobby work.

Yes, the Instek has SCP Language and MATLAB conection, that Hantek does not has, then..  In the univ lab we have lots of GDS-810 with serial interface. I also have a Agilent MSO6052A in the univ lab wich I use in MATLAB via GPIB, but it is in another ligue, HI.

In the other hand, I want my students can abbord a AWG and Oscilloscope at home to practice himself. I want to build a basic electronics and DSP practice tour based in MATLAB and SCP (hantek or other). I dont know the hantek 8060. Can be the solution, but it is more expensive at aprox 370eur, vs Hantek DDS 3X25 + Hantek DSO2090 = 250eur. It has more capabilities, too..

Sorry for the OFF-TOPIC!
Greetins
Manuel

Kozmyk:
I'm that impressed by the GOLTEK software that I've gone and bought a Hantek 3x25.
Excellent work.
Thank you.

Kozmyk:
3x25 arrived today.
The GolTek Controller makes it infinitely more useable.
No more stability problems.

Thanks for all your efforts. 
saturation:
Glad you like it Kozmyk, give us a review if you can; I know you recently had issues with the Siglent but your impression with your Kikusui, your upcoming new scope, comparing it to your current FG and any photos you can share would be nice.


--- Quote from: Kozmyk on September 14, 2011, 03:37:03 pm ---3x25 arrived today.
The GolTek Controller makes it infinitely more useable.
No more stability problems.

Thanks for all your efforts. 


--- End quote ---
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod