General > General Technical Chat

Small flyback transformer

(1/2) > >>

xzswq21:
Hello, I've been looking for a transformer manufacturer to build a few small ac flyback transformer for me, the input is 12v, 30KHz and the output is 10Kv and 1mA,

The smallest the better,

the transformer should be around:
LxWxH=32x26x24 mm


No need to have a high voltage diode.

in the first step I want to order a few prototypes and the second step I need to have some hundreds of the transformer in mass production.
Thanks

Zero999:
I don't know. My advice would be to look for new old stock CRT transformers. I doubt they still make them.

Another option might be an ignition transformer.

jonpaul:
Bonjour, we made amny 10,000s of similar decades ago.

these require vacuum varnish impreg or encapsulation as shown.

Due to setup and yield,  custom potting shell   MOQ will be many 1000s ...10,000s.

For protos or a few hundred, suggest to find a stock part eg CRT/scope/old TV replacement FB and adapt to use.

Bon chance,




Jon

xzswq21:

--- Quote from: Zero999 on July 28, 2021, 02:54:53 pm ---I don't know. My advice would be to look for new old stock CRT transformers. I doubt they still make them.
Another option might be an ignition transformer.

--- End quote ---
I've looked at them before on ebay, I didn't find an interesting option.
The transformer should be AC, I don't need a high voltage diode at the inside of the transformer, plus their primary inductors are useless bcoz they were made for old CRT TV :) as I want to produce many different types of High voltage device it's better to find a transformer manufacturer.

daqq:
Try contacting these guys, they can make all kinds of strange and wonderful wound and potted devices/transformers:

https://pvelektronic.com/en/products/potted-parts/

Not gonna claim you can get exactly that, but who knows.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version