| General > General Technical Chat |
| So... can you shove a 5.25 floppy through a laser/LED printer? |
| << < (4/6) > >> |
| CatalinaWOW:
The real question isn't whether the printer will be damaged, but if the floppy will survive. They are hard enough to get now that I wouldn't risk it if you need the floppy. If you don't need it, why bother printing on it? |
| nali:
Well a typical laser fuser temperature is in the order of 200C, and the fuser rollers exert a decent amount of pressure to transfer heat & squish the toner into the paper. My guess is a hot melt flop and cacked rollers. |
| Alex Eisenhut:
So the work printer it is... :-DD |
| Alex Eisenhut:
Boy I'm ridiculous, the answer was right on my desk, laser-printable water transfer decals. Well well well. I'll try it sometime. |
| ataradov:
But that's not all that different from a regular transparent sticker. |
| Navigation |
| Message Index |
| Next page |
| Previous page |