Author Topic: Someone still makes CRTs  (Read 932 times)

0 Members and 1 Guest are viewing this topic.

Offline Alex EisenhutTopic starter

  • Super Contributor
  • ***
  • Posts: 3549
  • Country: ca
  • Place text here.
Someone still makes CRTs
« on: August 17, 2020, 03:11:11 am »


hmm!
Hoarder of 8-bit Commodore relics and 1960s Tektronix 500-series stuff. Unconventional interior decorator.
 
The following users thanked this post: tom66, Homer J Simpson, SilverSolder, BrianHG, eti

Offline eti

  • Super Contributor
  • ***
  • !
  • Posts: 1801
  • Country: gb
  • MOD: a.k.a Unlokia, glossywhite, iamwhoiam etc
Re: Someone still makes CRTs
« Reply #1 on: August 17, 2020, 05:54:29 am »
Shove your lockdown, I'd be there and no mistake.
 

Offline LaserSteve

  • Super Contributor
  • ***
  • Posts: 1354
  • Country: us
Re: Someone still makes CRTs
« Reply #2 on: August 18, 2020, 12:09:06 am »
These folks still make the tubes...

https://www.thomaselectronics.com/manufacturers/

Steve
"When in doubt, check the Byte order of the Communications Protocol, By Hand, On an Oscilloscope"

Quote from a co-inventor of the PLC, whom i had the honor of working with recently.
 
The following users thanked this post: oPossum


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf