EEVblog Electronics Community Forum

General => General Technical Chat => Topic started by: psysc0rpi0n on April 07, 2020, 07:41:14 pm

Title: STM32 rookie courses
Post by: psysc0rpi0n on April 07, 2020, 07:41:14 pm
Hello.

Anyone knows about STM32 relate courses to start learning? Like video classes, problems, examples, etc? User manuals are not for complete starters. You need to have some basic knowledge from start. I have none.

I appreciate any resources.

Thanks
Psy
Title: Re: STM32 rookie courses
Post by: MasterT on April 07, 2020, 09:15:42 pm
On-line training:
https://www.stmicroelectronics.com.cn/content/st_com/en/support/learning/stm32-education/stm32-online-training/stm32f7-online-training.html (https://www.stmicroelectronics.com.cn/content/st_com/en/support/learning/stm32-education/stm32-online-training/stm32f7-online-training.html)
Title: Re: STM32 rookie courses
Post by: psysc0rpi0n on April 07, 2020, 09:30:47 pm
Quote from: MasterT on April 07, 2020, 09:15:42 pm
On-line training:
https://www.stmicroelectronics.com.cn/content/st_com/en/support/learning/stm32-education/stm32-online-training/stm32f7-online-training.html (https://www.stmicroelectronics.com.cn/content/st_com/en/support/learning/stm32-education/stm32-online-training/stm32f7-online-training.html)

I'll take a look at it... Thanks

Waiting for more. :)
Title: Re: STM32 rookie courses
Post by: psysc0rpi0n on April 10, 2020, 03:33:26 pm
Quote from: MasterT on April 07, 2020, 09:15:42 pm
On-line training:
https://www.stmicroelectronics.com.cn/content/st_com/en/support/learning/stm32-education/stm32-online-training/stm32f7-online-training.html (https://www.stmicroelectronics.com.cn/content/st_com/en/support/learning/stm32-education/stm32-online-training/stm32f7-online-training.html)

One question. Is there online training for F4 boards?  I have an STM32F407VET I got from ebay (some boar I found using STM32F407VET6). That one is for F7, right? Or can I follow the same instructions?

I also found this but the english is so, but so bad, that it's not easy to unerstand it all. Subs are completely useless.
https://www.youtube.com/playlist?list=PLnMKNibPkDnGtuIl5v0CvC81Am7SKpj02 (https://www.youtube.com/playlist?list=PLnMKNibPkDnGtuIl5v0CvC81Am7SKpj02)
Title: Re: STM32 rookie courses
Post by: enz on April 10, 2020, 03:46:33 pm

https://mcuoneclipse.com/ (https://mcuoneclipse.com/) did some very usefull tutorials.
You have to look in the archive though, because they are sometimes a couple of years old, still valid of course.
But there is some very good information to find.
Title: Re: STM32 rookie courses
Post by: psysc0rpi0n on April 11, 2020, 06:53:19 pm
Quote from: enz on April 10, 2020, 03:46:33 pm

https://mcuoneclipse.com/ (https://mcuoneclipse.com/) did some very usefull tutorials.
You have to look in the archive though, because they are sometimes a couple of years old, still valid of course.
But there is some very good information to find.

I found 2 entries so far.
Titles are:

Is Developing for ARM more difficult than for other Architectures (https://mcuoneclipse.com/2017/04/30/is-developing-for-arm-more-difficult-than-for-other-architectures/)

and

A new Freedom Board: FRDM-K20D50M with ARM Cortex M4 (https://mcuoneclipse.com/2013/04/15/a-new-freedom-board-frdm-k20d50m-with-arm-cortex-m4/)

The first is more generic and the second is about Cortex M4 which is the one my board has.