Author Topic: Stock Electronic Image FAILS (Read 227755 times)

ADC-1995 · « **Reply #100 on:** March 29, 2016, 01:54:57 am »

Not sure what the age to start using a soldering iron is with the potential for splattered liquid metal, but.....

McBryce · « **Reply #101 on:** March 29, 2016, 07:29:33 am »

My son is 4 1/2 years old and can already manage a decent solder joint (with supervision!).

McBryce.

rrinker · « **Reply #102 on:** March 30, 2016, 02:49:39 am »

Quote from: tom66 on August 23, 2015, 01:22:20 pm

In the Weird Al video "White and Nerdy", Al has a soldering gun, with a handle...

That always bothered me. Would be really hard to use.

Radio Shack sold that. A soldering iron in a soldering gun form factor. Seemed odd to me, never bought one.

Cubdriver · « **Reply #103 on:** March 30, 2016, 04:27:24 am »

I had one of the Rat Shack ones - heck, it's probably still kicking around here somewhere. I don't recall it being particularly awkward to use, and the handle stayed much cooler than the standard el-cheapo pencils I had at the time.

-Pat

FrankE · « **Reply #104 on:** March 30, 2016, 08:21:51 am »

EEVblog · « **Reply #105 on:** March 30, 2016, 09:24:57 am »

I just couldn't resist!
Meredith Perry from uBeam

tooki · « **Reply #106 on:** March 30, 2016, 10:37:28 am »

Quote from: EEVblog on March 30, 2016, 09:24:57 am

I just couldn't resist!
Meredith Perry from uBeam

Aaaahahahaha! Confused deer in the headlights look? Check! Condescending leer? Check! Hands clasped like Montgomery Burns? Check!

Eeeeexcellent.

McBryce · « **Reply #107 on:** March 30, 2016, 11:38:17 am »

What's with the face? And has it anything to do with where that blue tube ends?

McBryce.

Cubdriver · « **Reply #108 on:** March 30, 2016, 03:19:52 pm »

Those gloves look kind of thick to be using that Xuron cutter on the table. Can she even pick it up with them on?

-Pat

george graves · « **Reply #109 on:** March 31, 2016, 10:30:46 am »

I don't get what she's doing wrong? Other then wearing a bunny suit, but her hair is out? And it's not a clean room?

timb · « **Reply #110 on:** March 31, 2016, 12:40:56 pm »

Quote from: george graves on March 31, 2016, 10:30:46 am

I don't get what she's doing wrong? Other then wearing a bunny suit, but her hair is out? And it's not a clean room?

It's Meredith Perry, Mistress of Ultrasonica.

timofonic · « **Reply #111 on:** March 31, 2016, 04:17:09 pm »

Quote from: tooki on March 30, 2016, 10:37:28 am

Quote from: EEVblog on March 30, 2016, 09:24:57 am
I just couldn't resist!
Meredith Perry from uBeam

Aaaahahahaha! Confused deer in the headlights look? Check! Condescending leer? Check! Hands clasped like Montgomery Burns? Check!

Eeeeexcellent.

= Pretty nerd woman. I want to date her! Sex with science too! Exponential orgasm! 10^9999999999999999999999

T3sl4co1l · « **Reply #112 on:** March 31, 2016, 04:33:53 pm »

Quote from: timofonic on March 31, 2016, 04:17:09 pm

= Pretty nerd woman. I want to date her! Sex with science too! Exponential orgasm! 10^9999999999999999999999

http://www.smbc-comics.com/index.php?id=4060

timofonic · « **Reply #113 on:** April 01, 2016, 08:33:01 pm »

Quote from: T3sl4co1l on March 31, 2016, 04:33:53 pm

Quote from: timofonic on March 31, 2016, 04:17:09 pm
= Pretty nerd woman. I want to date her! Sex with science too! Exponential orgasm! 10^9999999999999999999999

http://www.smbc-comics.com/index.php?id=4060

Yep! I would do a control group with her hehe.

apelly · « **Reply #114 on:** April 01, 2016, 08:45:40 pm »

Quote from: timofonic on March 31, 2016, 04:17:09 pm

= Pretty nerd woman. I want to date her!

If you say so. Please bear in mind what an annoying, lying, manipulative, twat she is before you commit though.

timofonic · « **Reply #115 on:** April 01, 2016, 09:32:47 pm »

Quote from: apelly on April 01, 2016, 08:45:40 pm

Quote from: timofonic on March 31, 2016, 04:17:09 pm
= Pretty nerd woman. I want to date her!
If you say so. Please bear in mind what an annoying, lying, manipulative, twat she is before you commit though.

You're right. But that's a risk that can happen, lots people is an expert hiding their real intentions. Just be brave and strong, repair yourself like a good capacitor!

amspire · « **Reply #116 on:** April 02, 2016, 01:44:51 pm »

Quote from: Shock on April 02, 2016, 01:31:25 pm

I brought a few of these and noticed one had an "upgraded" extra fat earth pin. Searched online and found several stock images for different plugs that are defective as well. Can imagine people blindly stabbing these in until something breaks.

They are 15A plugs. The extra fat earth pin is so that it cannot be plugged into a 10A socket. You can plug a 10A plug into a 15A socket. Seems sensible to me.

timofonic · « **Reply #117 on:** April 02, 2016, 08:06:32 pm »

I wonder why UK and Aussies use such weird three pin plus. What's so cool with it? They look awkward to me!

AF6LJ · « **Reply #118 on:** April 03, 2016, 03:30:33 am »

Quote from: timofonic on April 02, 2016, 08:06:32 pm

I wonder why UK and Aussies use such weird three pin plus. What's so cool with it? They look awkward to me!

Among other things.

I like our old fashioned death trap electrical plugs and outlets; you learn a healthy respect for electricity by getting zapped as a child.

FrankE · « **Reply #119 on:** April 04, 2016, 10:27:36 pm »

What the hell is she doing?
http://www.intertronics.co.uk/intertronics-products/dispensing-2/

I went on that site to try to find some controlled dispensing tings 'n' stuff.

Red Squirrel · « **Reply #120 on:** April 04, 2016, 10:44:10 pm »

Looks like some kind of lead based sealant. It's to make sure the electrons don't fall out during transportation.

wagon · « **Reply #121 on:** April 14, 2016, 07:39:27 am »

Quote from: Shock on April 02, 2016, 01:31:25 pm

HPM brand Australian power plug.

I brought a few of these and noticed one had an "upgraded" extra fat earth pin. Searched online and found several stock images for different plugs that are defective as well. Can imagine people blindly stabbing these in until something breaks.

Those HPM plugs are a last resort. Get Clipsal stuff, it's much better.

Sbampato12 · « **Reply #122 on:** April 15, 2016, 01:55:11 pm »

They do on videos too!

http://www.dreamstime.com/stock-footage/electronics.html#details64591783

Check how to really make a use of tweezers.

McBryce · « **Reply #123 on:** April 19, 2016, 12:41:32 pm »

The first one is most likely the connector to some engine sensor in a car, no chance of an scary voltages there. But the second one?? What on earth is he trying to do? An is that some sort of mini bed he's made for the component?

McBryce.

Sbampato12 · « **Reply #124 on:** April 19, 2016, 01:55:37 pm »

And the notes are a real show.

A lot of engineer doing that, engineer doind this. RF Engineer (melting down some throug hole resistors....)


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: Stock Electronic Image FAILS (Read 227755 times)

Share me