| General > General Technical Chat |
| Texas Instruments XDS200 USB Debug Probe |
| << < (3/3) |
| rsjsouza:
Ok, if you see a connector inside, it is probably the cTI 20-pin connector, a ~15 year old standard for TI processors. Its pinout (and several others that comprise the TI and ARM JTAG connectors) is shown at: https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_jtag_connectors.html |
| developerR:
Hi Its certainly not a standard JTAG connector as I have all the adapters for Segger /TI / ARM / SWD and they are 10w 20w and 14w whereas this is a 16w |
| Navigation |
| Message Index |
| Previous page |