Author Topic: The proper way to DIY a board. (Doable too!!!!)  (Read 1500 times)

0 Members and 1 Guest are viewing this topic.

Offline BeaminTopic starter

  • Super Contributor
  • ***
  • Posts: 1567
  • Country: us
  • If you think my Boobs are big you should see my ba
Max characters: 300; characters remaining: 191
Images in your signature must be no greater than 500x25 pixels
 

Offline ebastler

  • Super Contributor
  • ***
  • Posts: 7375
  • Country: de
Re: The proper way to DIY a board. (Doable too!!!!)
« Reply #1 on: April 02, 2021, 03:10:11 pm »
Sorry, I can't bear listening to 30 minutes of that. Is that a computer-generated voice? If so, why does it have a German accent?
 

Offline tooki

  • Super Contributor
  • ***
  • Posts: 13156
  • Country: ch
Re: The proper way to DIY a board. (Doable too!!!!)
« Reply #2 on: April 08, 2021, 05:36:13 am »
Sorry, I can't bear listening to 30 minutes of that. Is that a computer-generated voice? If so, why does it have a German accent?
No, he’s a flesh and blood German human.

His deadpan humor is actually a fantastic feature of his channel.
 
The following users thanked this post: Dubbie, SilverSolder, newbrain, sandalcandal

Offline derree

  • Contributor
  • Posts: 23
  • Country: de
Re: The proper way to DIY a board. (Doable too!!!!)
« Reply #3 on: April 26, 2021, 07:20:30 pm »
Marco is a real human, and his humor is quite dry, which probably is accentuated by his robot like way of speaking.
 

Offline rdl

  • Super Contributor
  • ***
  • Posts: 3667
  • Country: us
Re: The proper way to DIY a board. (Doable too!!!!)
« Reply #4 on: April 27, 2021, 05:15:58 am »
I watched a few of his videos over the weekend. Good stuff. I now have his channel bookmarked.
 

Offline PaulAm

  • Frequent Contributor
  • **
  • Posts: 939
  • Country: us
Re: The proper way to DIY a board. (Doable too!!!!)
« Reply #5 on: April 27, 2021, 03:22:47 pm »
That was an impressive project.  Have to pay more attention to what CERN releases.
 

Offline Sal Ammoniac

  • Super Contributor
  • ***
  • Posts: 1764
  • Country: us
Re: The proper way to DIY a board. (Doable too!!!!)
« Reply #6 on: April 27, 2021, 08:03:02 pm »
 "That lucky bastard is going to live right here, in the middle of a precision sandwich"

 :-DD :-DD :-DD
"That's not even wrong" -- Wolfgang Pauli
 

Offline Bud

  • Super Contributor
  • ***
  • Posts: 7276
  • Country: ca
Re: The proper way to DIY a board. (Doable too!!!!)
« Reply #7 on: April 27, 2021, 09:55:56 pm »
The blogger's presentation style is incredibly boring. I could only handle a fraction of the video, then navigated away.
Facebook-free life and Rigol-free shack.
 

Offline LaserSteve

  • Super Contributor
  • ***
  • Posts: 1354
  • Country: us
Re: The proper way to DIY a board. (Doable too!!!!)
« Reply #8 on: April 28, 2021, 01:47:08 am »
Loved it!

Steve
"When in doubt, check the Byte order of the Communications Protocol, By Hand, On an Oscilloscope"

Quote from a co-inventor of the PLC, whom i had the honor of working with recently.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf