| General > General Technical Chat |
| The Rigol DS1052E |
| << < (12/166) > >> |
| Simon:
Thanks Trent, normally the lowest possible setting on a camera is plenty for web purposes or there are some nice freeware photo editors out there if you like fine tuning or have like me a minimum of 2 Mp on your camera, although thats not too bad, paint.net is quite a good one, I always shoot at 10 Mp and then worry about it later as my job is as a QC inspector so often I have to photograph damaged goods, on later inspection we may find more damage but with a large image an area can easily be isolated and croped to a suitable size. |
| TrentO:
Simon, thanks for the advice--that's a 'tip' that I can actually use. Dago's tip is a useful as well. |
| EEVblog:
You usually don't need to lower the res much, the key is the compression ratio. I use Irfanview, and simply re-saving images with 70-80% JPEG compression with the same res saves a lot of space for starters. Dave. |
| Simon:
dave a 6 Mp image with with 66-70 % compression will still be large I find the best thing is a 800 pixel wide image with a good 80-90 % compression, this is immediately usable on the web is not large (1-200 KB) and is of good quality and easier to handle in up/download |
| markus:
Two questions: 1) What do we think of the Rigol vs Owon o-scope, say 5022S? Apart from 25 vs 50mhz. 2) Do we think it is possible some people are receiving counterfeit/copied Rigol scopes, explaining the quality differences we are seeing? This seems to be a problem with Chinese goods.. Dave, do you know the vendor you purchased your unit from on ebay? Could other buyers also list their vendor? Thanks for the video blog, I enjoy it! I also agree with others that suggest an episode about general scope use, tips, tricks, etc. I would like to see that. :) |
| Navigation |
| Message Index |
| Next page |
| Previous page |