General > General Technical Chat
What tool for pot nut?
<< < (5/7) > >>
Fraser:
That looks like the front of an R&S CMS5x

I bought lens spanner’s for just this sort of challenge..... and for lens disassembly  :)

They are relatively inexpensive and very useful to have in the tool box. I have all of the types shown in the attached pictures. I paid around £6 each for mine.

Fraser
notsob:
something like this

https://www.buerklin.com/en/Slotted-nut-wrench-SS6/p/06L6414
amyk:
I would use a pin spanner of the right size. A punch and a hammer may work too.
Benta:
Judging by the OP's photo, the nut sits too deep for a pin spanner.
tkamiya:
Two flat-head screw drivers and a vice grip.  Crude and prone to slip, so controlling force and being gentle is very important.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod