General > General Technical Chat

What tool for pot nut?

<< < (5/7) > >>

Fraser:
That looks like the front of an R&S CMS5x

I bought lens spanner’s for just this sort of challenge..... and for lens disassembly  :)

They are relatively inexpensive and very useful to have in the tool box. I have all of the types shown in the attached pictures. I paid around £6 each for mine.

Fraser

notsob:
something like this

https://www.buerklin.com/en/Slotted-nut-wrench-SS6/p/06L6414

amyk:
I would use a pin spanner of the right size. A punch and a hammer may work too.

Benta:
Judging by the OP's photo, the nut sits too deep for a pin spanner.

tkamiya:
Two flat-head screw drivers and a vice grip.  Crude and prone to slip, so controlling force and being gentle is very important.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod