Author Topic: Whats your Work-Bench/lab look like? Post some pictures of your Lab.  (Read 2609626 times)

0 Members and 16 Guests are viewing this topic.

Offline Isir Elektronika

  • Newbie
  • Posts: 2
  • Country: hr
    • Isir Elektronika
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4900 on: February 12, 2025, 08:36:00 pm »
Here is my workbench, or the main one, i have 4 of them arround the workshop
« Last Edit: February 12, 2025, 08:37:53 pm by Isir Elektronika »
 
The following users thanked this post: xrunner, RoGeorge, ch_scr, pqass, Hifi Necromancer, neverendingstudent, BlownUpCapacitor

Offline SMITH_tool

  • Newbie
  • Posts: 2
  • Country: sk
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4901 on: February 12, 2025, 10:41:51 pm »
Beauty. Do you have access to cheap wood?
 

Offline zzattack

  • Regular Contributor
  • *
  • Posts: 138
  • Country: nl
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4902 on: March 13, 2025, 11:46:33 pm »
Shelves fill up quicker than they should
 
The following users thanked this post: Addicted2AnalogTek, audiotubes, earthtodan

Offline EEVblog

  • Administrator
  • *****
  • Posts: 39836
  • Country: au
    • EEVblog
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4903 on: March 13, 2025, 11:58:37 pm »
I have some floor again...

 
The following users thanked this post: Addicted2AnalogTek

Offline coppercone2

  • Super Contributor
  • ***
  • Posts: 11965
  • Country: us
  • $
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4904 on: March 14, 2025, 12:17:53 am »
there is a magnet with a hook on it stuck to a caliper that got itself entangled in a bunch of twisted pairs (some of which are soldered to dead bug components on a heat sink under neath) and scope probes :(
 

Offline neverendingstudent

  • Regular Contributor
  • *
  • Posts: 94
  • Country: us
    • YouTube Channel
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4905 on: April 01, 2025, 11:47:45 pm »
Well, I finally reached a nice stable point where I've implemented all the major upcoming changes I had planned, and don't have any more major changes in mind soon.  Was finally able to record my State-of-the-Bench update video that I had planned on recording back in December of 2024.  Posting a picture as well as a link to the video for my workbench.

 
The following users thanked this post: ledtester

Offline passedpawn

  • Contributor
  • Posts: 40
  • Country: us
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4906 on: April 02, 2025, 12:32:36 am »
I'll play.  I've been running a consulting biz out of this room for a LOT of years.  Unlike some here, I don't keep redundant equipment in this room (in fact, I just gave a lot of it away to young engineers).  So, VNA, Oscope, triple power supply, arb func gen, fluke bench voltmeter.  That's all I really need.  Weller soldering stuff.  My engineering life has been really good folks.
 
The following users thanked this post: neverendingstudent

Offline richnormand

  • Supporter
  • ****
  • Posts: 735
  • Country: ca
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4907 on: April 02, 2025, 02:08:37 am »
Love the CRC Handbook of Chemistry and Physics in the upper right corner...
Repair, Renew, Reuse, Recycle, Rebuild, Reduce, Recover, Repurpose, Restore, Refurbish, Recondition, Renovate
 

Offline Shock

  • Super Contributor
  • ***
  • Posts: 4376
  • Country: au
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4908 on: April 02, 2025, 02:14:30 am »
I don't keep redundant equipment in your room either, you don't have the space. :)

Soldering/Rework: Pace ADS200, Pace MBT350
Multimeters: Fluke 189, 87V, 117, 112   >>> WANTED STUFF <<<
Oszilloskopen: Lecroy 9314, Phillips PM3065, Tektronix 2215a, 314
 
The following users thanked this post: K0ELB

Offline Black Phoenix

  • Super Contributor
  • ***
  • Posts: 1150
  • Country: hk
Re: Whats your Work-Bench/lab look like? Post some pictures of your Lab.
« Reply #4909 on: April 02, 2025, 10:24:19 am »
I inquired the Admin team regarding this:

I'm currently the top moderator in a subreddit called MakerLabStations (https://www.reddit.com/r/MakerLabStations/) that is what this thread is but in the reddit website.

Currently is a small subreddit, with less than 2.5k users (since creation in September 2020), and no more than 20 or 30 posts. As solo moderator I can say that the requests for moderation are based in 5 or 6 in the total life of the subreddit, with one banned user because of continuous self promotion without further interaction other than promoting his own Youtube channel. So people there are well mannered and the conversation don't derail from the objective of it (plus the rules are kinda self explanatory regarding politics and off topic).

I would ask kindly if any user for some reason have a reddit account could post there their own LabStation, kinda like is done here and subscribe to it please. It would help to grow it and create a lot more diversity in the posts (and serve the subreddit to more people by being show in the side bar, kinda like Youtube serves your videos the more interaction you have with your own community and views). If not then is OK anyway, no hard feelings.

Thank you for the time taken to read this request.

This is a bump from my subreddit, first post was 4/5 years go by the date.

Just a reminder in case anyone uses reddit and doesn't mind publishing there.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf