General > General Technical Chat

Why are ICs/Semis black?

<< < (7/7)

retiredfeline:

--- Quote from: Gyro on May 10, 2021, 09:42:46 am ---He may not have believed it, but Mullard certainly did!  ;) The original OC71 had clear protective grease around the junction. People (we) would scrape the paint off and use them as phototransistors. Mullard got wind of this and started using an opaque white grease in them. They then sold the OCP71 phototransistor (clear grease) for a very significant markup! Irrc, it had a little plastic sleeve around the bottom with the part number on.

--- End quote ---

I once made remote xenon flash synchronisers using scraped (and scrapped, probably due to leakage) OC71 transistors triggering a SCR. Worked great.

GlennSprigg:

--- Quote from: james_s on May 10, 2021, 04:42:39 am ---
--- Quote from: GlennSprigg on May 09, 2021, 12:20:20 pm ---
Also around that time (and earlier!), certain old valves/tubes had their glass body spray-painted black, and sometimes gold...  Although
for different reasons!  although SOME clear-glass tubes actually had an external light-source close to them, in order to 'excite' the coated
plates, that's beyond the discussion here!!...

Anyway, their main reason for 'coating' in the above paragraph, was to HIDE what the manufacturers had done technology wise, inside.
But NOT to stop giving away 'good' secrets, but out of embarrassment when technology had 'improved', and a cheap manufacturer was
not using the latest science in their Plates/Coatings & 'Getter' technology, that was obvious without the Paint!

--- End quote ---

I thought it was a conductive coating for shielding purposes? I don't see much value in trying to hide what's inside, the average person would never know the difference and anyone who actually wanted to see what was inside could just break it open.

There were also some tubes that had metal envelopes, not a metal shell over a glass envelope but the metal was actually the envelope.

--- End quote ---

Hi James. Sorry about the delay!  Yes, there were various reasons for outer coatings... And there were (a lot!) with metal casings, (as you say, not
the clipped-on outer-shell for 'shielding'), and those were 'mainly' used in Military grade equipment, and mainly due to their physical robustness !   :-+

However, some coatings were to 'mask' what's going on inside at the time!  I was 1st commenting just from memory, but I've found this now, that
may give further evidence... Below is one example from 'Wikipedia' talking about the 'Mullard/Philips' partnership...  https://en.wikipedia.org/wiki/Mullard
Not far from the top, on the right-hand side, you will find this photo, and underneath it a 'Description'...


A Mullard TDD4 valve. The gold spray coating served no purpose other than to hide the blackened interior,
as Mullard valves were still manufactured using the azide process, long abandoned by other makers.

james_s:
But is that to hide it from prying eyes, or just dress it up and make it look fancy? They mention the blackened interior which makes me suspect they're referring to a getter flash which was black. It may be they wanted to avoid people thinking the tube was burned out or something due to a darkening resembling a well used light bulb.

Canis Dirus Leidy:
More on the question of package colors. The old 237-series ICs with a "Kulon" case. Mostly dirty-white, but there are also colored plastic.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod