Author Topic: Need to source similar enclosure  (Read 1290 times)

0 Members and 1 Guest are viewing this topic.

Offline Alan

  • Newbie
  • Posts: 4
Need to source similar enclosure
« on: July 07, 2012, 10:29:05 pm »
Hi all,

I am looking to find an enclosure for my product. Teko very kindly provided me with a sample of the MC11.9 (http://www.teko.co.uk/en/prodotti/famiglia/FP/serie/40). This case is perfect for my needs. However with only needing batches of 25 or 50 the price quoted was very steep at ~£6 per enclosure. I am aware that this design of case is copied by many and was wondering if anyone knew other places where I can source this enclosure or a similar one.

Regards.
 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 7374
  • Country: us
    • SiliconValleyGarage
Re: Need to source similar enclosure
« Reply #1 on: July 08, 2012, 12:36:07 am »
try
BUD engineering
or
HAMMOND manufacturing.

that is indeed a run -of-the-mill ugly enclosure.
Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf