Can you recommend 3-4 must have T-15 TIPS, for the Hakko FX-951-66?
I really don't do a lot of soldering, but I hate cheap $20 ones with no control. Over the years in my amateur hands, I came to believe I simply suck at soldering, destroying any confidence. The few times I used the 888 and received some basic how to advice, I did much better. For general hobby work I assume 3-4 different TIPS would be a good start, but there are so many to choose from. The only tip I used with the 888 was the T-18-D16, and it worked well. I'm going to have to study up on the different purposes for all those tip choices. And one of these days, besides online how to videos, I would love to take a hands on class as well. THANKS!
1. A few chisels, say 1.6, 2.4, & 3.2mm (covers SMD that doesn't require a microscope as well as Thru-hole)
2. 3 - 4mm Hoof and/or dedicated drag soldering tip (hoof can do more, but isn't quite as easy to use for drag soldering vs. dedicated tip)
3. Bent conical (great for passive SMD parts)
This small grouping of tips can do an amazing amount of work and relatively comfortable to use as well (i.e. not having to work at weird angles).
FWIW, Hakko's
Tip Selection page is worth perusing.