What sort of load will it be used with? If an offline power supply with a rectifier input, it will probably limit at a lower current than expected. If it's an inductive load, like a transformer, there's a danger of it forming a series resonant circuit, saturating the transformer and causing more current to flow than expected. I recall someone writing this up as a trick to make the transformer act as a voltage regulator.
The film caps used in HVAC motors often have a lead that disconnects itself from the wound foil plates if the cap overheats and swells up. I don't know if electrolytic caps do the same. I suspect they do because the ones I've looked at seemed to be open circuit rather than a partial value.