Author Topic: Example Project: EEVblog uCurrent  (Read 2894 times)

0 Members and 1 Guest are viewing this topic.

Offline voltsandjoltsTopic starter

  • Supporter
  • ****
  • Posts: 2344
  • Country: gb
Example Project: EEVblog uCurrent
« on: April 25, 2017, 01:36:31 pm »
Dave's uCurrent Rev5 board translated to Circuit Studio format.

The zipped PCB file alone was over the 1MB forum attachment limit so I used 7zip (free open source) to compress and split the project to two files.

To unzip the project:
1/ Download both the attached files
2/ Remove the ".hex" file extension to leave the extensions as ".001" and ".002" (workaround for forum file extension rules)
3/ Get 7zip
4/ Open "uCurrentRev5-CStudio.7z.001" with 7zip
The following users thanked this post: hammy, iainwhite, slothsd

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo