Author Topic: Nets shows un-routed trace  (Read 1349 times)

0 Members and 1 Guest are viewing this topic.

Offline limata

  • Contributor
  • Posts: 25
  • Country: ca
Nets shows un-routed trace
« on: February 04, 2020, 06:21:43 am »
I have completed the layout of the whole board and DRC shows no error. However, the PCB-Nets editor shows a power rail net with 39mil unrouted. Not sure where that comes from?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf