Author Topic: Video - Capturing Components from Altium Vault  (Read 1605 times)

0 Members and 1 Guest are viewing this topic.

Offline Harvs

  • Super Contributor
  • ***
  • Posts: 1163
  • Country: au
Video - Capturing Components from Altium Vault
« on: December 22, 2016, 05:04:07 am »
This video shows how to capture the schematic symbol and PCB footprint from Altium Vault components into your own personal libraries.
https://youtu.be/-TBinZRimE4
 
The following users thanked this post: Macbeth, mrtn, slowertech, slothsd, Antony_K

Offline Geoff_S

  • Regular Contributor
  • *
  • Posts: 75
  • Country: au
Re: Video - Capturing Components from Altium Vault
« Reply #1 on: December 23, 2016, 06:27:19 am »
Thanks Harvs, very helpful.
 
The following users thanked this post: mrtn

Online Macbeth

  • Super Contributor
  • ***
  • Posts: 2556
  • Country: gb
Re: Video - Capturing Components from Altium Vault
« Reply #2 on: December 23, 2016, 02:24:34 pm »
Thanks for this. I was getting frustrated as the Paste option between a Schematic directly onto a Schematic Library document was greyed out for some reason. Clicking the SCH Library panel and pasting there instead works a treat.  :-+
 

Offline Antony_K

  • Newbie
  • Posts: 1
  • Country: au
Re: Video - Capturing Components from Altium Vault
« Reply #3 on: February 23, 2017, 06:29:59 am »
Thanks Harvs, most helpful.

It seems as though they removed the ability to 'clone' after CS V1.1?
In this post:
https://www.eevblog.com/forum/circuit-studio/circuit-studio-bugsissues/msg988507/#msg988507
rwoody's attachment #3 in post #2, shows 'Operations -> Clone [part id]'... which doesn't seem to be there any more???

Would be rather handy.  At least with your method there is still 'a way'. Thanks for documenting.

Cheers, AK.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf