Author Topic: Submit your design idea & enter design contest to win cash rewards!!  (Read 6388 times)

0 Members and 1 Guest are viewing this topic.

Offline ShwetaBaidTopic starter

  • Newbie
  • Posts: 9
  • Country: in
Are you ready to let the world know about your talent in electronics design?

Renesas’ GR Peach Design Content is the perfect platform for you to demonstrate your expertise in electronics design. After the grand success of GR PEACH in India, Renesas announces embedded design challenge in ASEAN, Australia and New Zealand.

IOT is the new trend and GR PEACH offers an ideal platform for IOT prototyping. Fully pin-compatible with Arduino UNO, GR-PEACH is an ARM® mbed™ enabled development platform.

You can get a GR PEACH development board for free by submitting your abstract if your abstract is selected and stand a chance to win exciting cash rewards.

Click Here http://gadget.renesas.com/en/contest/2017/ANZ/] [url]http://gadget.renesas.com/en/contest/2017/ANZ/  [/url] to know more.

Create fun by integrating Ideas with Electronics!

http://gadget.renesas.com/en/contest/2017/ANZ/ 
 

Online tszaboo

  • Super Contributor
  • ***
  • Posts: 7283
  • Country: nl
  • Current job: ATEX product design
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #1 on: March 24, 2017, 05:48:55 pm »
Renesas
"We do community stuff, where you need to sign an NDA to get the Japanise datasheet, and buy @100K, or we dont talk to you"
"Renesas... Where ideas come to life"
 
The following users thanked this post: kony

Offline ShwetaBaidTopic starter

  • Newbie
  • Posts: 9
  • Country: in
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #2 on: March 27, 2017, 07:05:47 am »
NANDBlog -
I am sorry but really did not understand you indications.

 

Offline VEGETA

  • Super Contributor
  • ***
  • Posts: 1905
  • Country: jo
  • I am the cult of personality
    • Thundertronics
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #3 on: March 27, 2017, 07:41:35 am »
I'd like to explain based on my own understanding:

Arduino-compatible boards like these shown on Renesas boards must be cheap and available, but they are not! The GR-Peach thing is around 122$ minimum  for an Arduino Uno form factor board... So the newbie asks himself "why should I get it when I can buy 10 Arduinos for the same price?".

Plus, Renesas support for the community is shit. No hacker\maker\hobbyist buys their stuff since it is pricey and very hard to start with. They didn't make ANY effort to simplify them and make them friendly. Look for STM32 boards for example, they are extremely cheap and some rumors say that the company is selling them on a loss just to get into the market.

I like Renesas products and wish I have time to dig into them in the future, but that is x100 times harder than doing anything else in embedded world  :-- :--

My 2 cents,
Prince of all Saiyans

Offline ShwetaBaidTopic starter

  • Newbie
  • Posts: 9
  • Country: in
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #4 on: March 28, 2017, 04:10:59 am »
Dear Vegeta
I appreciate your straight forward expression of dissatisfaction related to the price points.
Unlike other boards, GR PEACH is not using an MCU but an MPU based on ARM Cortex A9.
It uses RZ-A1H family of Renesas processors. Please read more here  -
https://www.renesas.com/en-in/products/microcontrollers-microprocessors/rz.html

The power offered here is much more than a simple MCU based board.

The good news is, we are giving the board (full version) free of cost to all the hobbyists, makers who express interest.

We have My Renesas forum - community driven initiative.
So you see there is a change for good, to help support community.

I hope you would try this out . http://gadget.renesas.com/en/contest/2017/ANZ/

Thanks
 
The following users thanked this post: VEGETA

Offline VEGETA

  • Super Contributor
  • ***
  • Posts: 1905
  • Country: jo
  • I am the cult of personality
    • Thundertronics
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #5 on: March 28, 2017, 06:21:59 am »
Dear ShwetaBaid,

I told you I like Renesas but getting started with their tools is a lot harder than other vendors of all kinds. Changing is nice too.

I know that the board is powerful but how can a hobbyist or a beginner engineer like me do good stuff with it? stuff that utilize its power like making nice GUI and HMI.

Also, you should make ALL your boards available from many famous distributors such as digikey, mouser, .... etc. So one can buy his parts and your board from the same source.

I was interested in the Sakura board more since it is so cheap, I want to start with ARM MCUs and always liked Renesas ones but the boards were pricey and maybe not suitable for a beginner. Instead, one can buy STM32-discovery board for 20$ and learn ARM with it.

Plus, learning via Sakura is like learning AVR through Arduino, which is not really learning AVR. So eventually one needs to learn via the expensive boards right?

I appreciate your response and maybe you can suggest something for new learners of ARM MCUs like me.

thanks

Offline VEGETA

  • Super Contributor
  • ***
  • Posts: 1905
  • Country: jo
  • I am the cult of personality
    • Thundertronics
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #6 on: March 28, 2017, 10:08:24 pm »
what software can we use to make professional GUIs using Renesas boards? << A *FREE* software that is, since other than that will be pointless.

This was my problem long time ago and couldn't find a solution for it. I like the gadgets but there are fundamental problems explained in my previous post. I hope this helps you help us xD.

Offline ShwetaBaidTopic starter

  • Newbie
  • Posts: 9
  • Country: in
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #7 on: April 05, 2017, 09:48:15 am »
Dear Vegeta,

Thank you for your response.
Luckily, all gadget renesas using Cloud based IDE and graphical programming.

i request you to kindly check our community and user forum on renesasrulz.com.
The contest was very successful in India and most of students & hobbyist community participated in it.
I am glad to share we had over 600+ registrations for contest in India and only 150 got selected for free boards.

There are videos and articles posted by GR PEACH used on youtube. I request you to have a look.
The board is distributed free of cost, the IDE is cloud based, all you need is a computed and internet.

http://electronicsforu.com/technology-trends/news/peach-board-developers
is an article in most famous media called Electronics For you.

Please feel free for seeking technical support from our community.
 

Offline VEGETA

  • Super Contributor
  • ***
  • Posts: 1905
  • Country: jo
  • I am the cult of personality
    • Thundertronics
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #8 on: April 05, 2017, 05:47:32 pm »
I asked about how to design a GUI? I mean the software used for these boards and Renesas in general.

Offline ShwetaBaidTopic starter

  • Newbie
  • Posts: 9
  • Country: in
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #9 on: April 06, 2017, 06:57:32 am »
mswhin63 :

The link was for contest registration and so contest details are provided.
To enter the contest you just need to regsiter and submit abstract.

Please visit boards distributor section of website to get details on boards cost.
http://gadget.renesas.com/en/product/peach.html

GR-PEACH boards and other shields can be purchased through the following sites:

Japanese distributors are here. (??????????????)

Core Staff (GR-PEACH, AUDIO CAMERA Shield, 4.3 LCD shield)
http://www.zaikostore.com/zaikostore/en (Click and search "GR-PEACH")
Chip One Stop, Inc.
http://www.chip1stop.com/search.do?makerCd=COR1&keyword=GR-PEACH&cid=COREg
Digi-Key Electronics
http://www.digikey.com/product-search/en/programmers-development-systems/evaluation-boards-embedded-mcu-dsp/2621773?k=GR-Peach
 

Offline ShwetaBaidTopic starter

  • Newbie
  • Posts: 9
  • Country: in
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #10 on: April 06, 2017, 07:06:24 am »
vegeta:

Technical Information

GR PEACH Getting Started on mbed
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started
A guide for just starting to use their newly purchase GR-PEACH/GR-PEACH-FULL board.

Code Repository on mbed
https://developer.mbed.org/teams/Renesas/code/
Various codes to support processing for webcam, graphics, etc.

TOPPERS/ASP on GR-PEACH
https://github.com/ncesnagoya/asp-gr_peach_gcc-mbed
TOPPERS/ASP Kernel with mbed and Arduino Library for GR-PEACH.

GADGET RENESAS Community: GR-PEACH user forum
http://renesasrulz.com/gadget_renesas_user_forum/f/228.aspx
Post your query and let's discuss about GR-PEACH.

E-mail
gadget_renesas@lm.renesas.com
 

Offline YuukiOkamiya

  • Newbie
  • Posts: 3
  • Country: jp
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #11 on: April 06, 2017, 07:43:07 am »
Dear VEGETA-san,

I'm in charge Gadget Renesas boards. Thank you for your frank opinion. I'm appriciated with that.
Anyway, GUI you mean is like LCD pannel following sample ?
https://developer.mbed.org/teams/Renesas/code/RGA_HelloWorld/?platform=Renesas-GR-PEACH
https://developer.mbed.org/teams/Renesas/code/RGA_HelloWorld_4_3inch/
« Last Edit: April 06, 2017, 02:23:35 pm by YuukiOkamiya »
 
The following users thanked this post: TheDane

Offline VEGETA

  • Super Contributor
  • ***
  • Posts: 1905
  • Country: jo
  • I am the cult of personality
    • Thundertronics
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #12 on: April 06, 2017, 09:42:05 am »
Dear Yuuki Okamiya-san,

I meant something like this: http://touchgfx.com/

A TFT screen with a graphical user interface (GUI) on it and controlled by the microcontroller. It must have a designer software to create the GUI, then make code for it. What are your free options for Renesas and GR-PEACH?


Offline YuukiOkamiya

  • Newbie
  • Posts: 3
  • Country: jp
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #13 on: April 06, 2017, 02:22:32 pm »
Thank you four your information. I got it. Let me have a time to share the information with our engineer.
 

Offline YuukiOkamiya

  • Newbie
  • Posts: 3
  • Country: jp
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #14 on: April 09, 2017, 02:34:57 pm »
I'm sorry, but free software for GUI as you mentioned is nothing for GR-PEACH as of today. Below 2 example for graphic control are published.
https://developer.mbed.org/users/dkato/code/GR-PEACH_Digital_Signage/
https://developer.mbed.org/teams/Renesas/code/RGA_HelloWorld_4_3inch/

The below starterkit provides GUI library as you mentioned, but that is necessary to perchase separately to try.
http://tes-dst.com/tes-dst/index.php/hmi-tooling/guiliani-egml-for-renesas-rza1-starterkit
 

Offline VEGETA

  • Super Contributor
  • ***
  • Posts: 1905
  • Country: jo
  • I am the cult of personality
    • Thundertronics
Re: Submit your design idea & enter design contest to win cash rewards!!
« Reply #15 on: April 09, 2017, 04:48:27 pm »
Thanks for your reply.

I guess a powerful board like this must have such a software because it is what this board is supposed to do. You can support cheap version or free ones online.

So if someone wants to make his own GUI and maybe for a small commercial product using your RZ series, what should he use?

Offline ShwetaBaidTopic starter

  • Newbie
  • Posts: 9
  • Country: in
 



Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf