Author Topic: Czech opensource router "Turris omnia" in crowd fund  (Read 4383 times)

0 Members and 1 Guest are viewing this topic.

Offline 07PepaTopic starter

  • Newbie
  • Posts: 6
Czech opensource router "Turris omnia" in crowd fund
« on: October 10, 2015, 08:21:42 am »
Hi there i just noticed that Turris lite was renamed on Turris omnia and finaly officialy will be available in as crowd funding project. and it have Tons of security thing it even have criptochip .... and Just for 100USD
more in https://omnia.turris.cz/en/


and video https://www.youtube.com/watch?t=43&v=1Gm_x9vKQ6Q

P.s. if you does not know where is Czech republic... we are next to Austria... not Australia :D
« Last Edit: October 10, 2015, 11:22:08 am by 07Pepa »
 

Offline EPLan

  • Contributor
  • Posts: 20
  • Country: gb
Re: Czech opensource router "Turris omnia" in crowd fund
« Reply #1 on: October 15, 2015, 12:05:04 am »
You can also place a non-binding pre-order that gives you priority when the hardware is released.  :)
 

Offline 07PepaTopic starter

  • Newbie
  • Posts: 6
Re: Czech opensource router "Turris omnia" in crowd fund
« Reply #2 on: November 12, 2015, 06:20:24 pm »
now project is on  indie go go!
https://www.indiegogo.com/projects/turris-omnia-hi-performance-open-source-router#/

and i told them that it will be nice to spin one turris omnia for mailback. Because many peope will be abble to see it. and it will be interesting to see Dave hack around with it and make something interesting.  But as it look they just think about and mostly doubt about it. Because turris is mainly interesting because of sowftware and not hardware(but still they use hi quality caps).  only "pornografic thing" is "criptochip" so it something for 5 minute teardown.

p.s. it is also strong in coverage. throught 1 floor and 2 wall  still catching preaty stron signal ( with not full power wifi) when i turn it up at 100mW i am able to catch stable wifi in 400m (fast enought to maxe a skype call) ( maximal range 700m ) but there is not so much other wifi networks and it is almost LoS ( only one wall in way of signal) and this was achieved only with cellphone and oreginal antenas...
« Last Edit: November 12, 2015, 06:42:53 pm by 07Pepa »
 

Online Marco

  • Super Contributor
  • ***
  • Posts: 6694
  • Country: nl
Re: Czech opensource router "Turris omnia" in crowd fund
« Reply #3 on: November 14, 2015, 04:18:06 pm »
Did they use ECC memory? (Since the Armada supports it, it would be a waste not too.)
 

Offline 07PepaTopic starter

  • Newbie
  • Posts: 6
Re: Czech opensource router "Turris omnia" in crowd fund
« Reply #4 on: November 16, 2015, 07:31:18 pm »
I do not know, but you can ask them in indiegogo.... they will tell you.

And this "next big geek Thing" i can not even use more over 4% of it is function but i will do it later GPIO, one wire sensors etc etc. I know that one guy use it for house heating control watterpump control etc...
 

Offline crispus

  • Regular Contributor
  • *
  • Posts: 131
  • Country: ro
Re: Czech opensource router "Turris omnia" in crowd fund
« Reply #5 on: January 09, 2016, 07:40:34 pm »
Did anyone "baked" this? Is it worthy?
I know I'm numskull, but I look around me and I feel better.
 

Offline bitwelder

  • Frequent Contributor
  • **
  • Posts: 964
  • Country: fi
Re: Czech opensource router "Turris omnia" in crowd fund
« Reply #6 on: January 17, 2016, 06:44:17 pm »
At the end of the month they will have a presentation at FOSDEM 2016:
https://fosdem.org/2016/schedule/event/turrisopensourcerouter/
(the event should be also streamed live)
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf