Author Topic: 3D Printer / Pick & Place and Light Mill for $2000++ FLEX.ARM  (Read 2666 times)

0 Members and 1 Guest are viewing this topic.

Offline kaz911Topic starter

  • Super Contributor
  • ***
  • Posts: 1052
  • Country: gb
3D Printer / Pick & Place and Light Mill for $2000++ FLEX.ARM
« on: September 22, 2014, 02:36:43 pm »
Have you guys seen this yet?

https://www.kickstarter.com/projects/535786699/flxarm-low-cost-precision-robotic-arm

Not affiliated - but basic "Robot" with 3D Print/ Pick&Place / Milling in a robot that prints out in "big format" if you can live with their "circular" format.

 

Offline PlainName

  • Super Contributor
  • ***
  • Posts: 6769
  • Country: va
Re: 3D Printer / Pick & Place and Light Mill for $2000++ FLEX.ARM
« Reply #1 on: September 22, 2014, 02:53:47 pm »
Gosh, I would lurve to have one of those on my desk just to watch it do stuff. Any stuff. Very nice indeed.

But... for 2K you could get something more capable, albeit not as pretty, and so far as I can see the differentiator is that this one has stuff like PnP, printing, etc in mind from the off.
 

Online edavid

  • Super Contributor
  • ***
  • Posts: 3375
  • Country: us
Re: 3D Printer / Pick & Place and Light Mill for $2000++ FLEX.ARM
« Reply #2 on: September 22, 2014, 05:07:48 pm »
But... for 2K you could get something more capable, albeit not as pretty, and so far as I can see the differentiator is that this one has stuff like PnP, printing, etc in mind from the off.

What are some other closed loop platforms you can get for $2K?
 

Offline PlainName

  • Super Contributor
  • ***
  • Posts: 6769
  • Country: va
Re: 3D Printer / Pick & Place and Light Mill for $2000++ FLEX.ARM
« Reply #3 on: September 22, 2014, 05:11:16 pm »
I was thinking more about the construction. Closed loop is nice, but not a critical aspect.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf