EEVblog Electronics Community Forum
Electronics => PCB/EDA/CAD => DIPtrace => Topic started by: lutkeveld on January 18, 2015, 02:21:07 pm
-
How do you connect one pin in the component editor to multiple pads of the attached pattern?
My QFN has multiple VDD's and GND's, which I want assigned to one pin of the component for easy working.
-
Hi, to do this go into the component editor, select your component, click the pattern button and when the new screen opens you can click a pad and the one you want to connect it to and "draw" a red between them. That means that those two pads are at the same potential.
-
Awesome! That works. Thanks for your help :D
-
You're welcome. If you have any other questions post them.