Author Topic: electromagnetic water softner  (Read 586 times)

0 Members and 1 Guest are viewing this topic.

Offline Raj

  • Frequent Contributor
  • **
  • Posts: 656
  • Country: in
  • Self taught, experimenter, noob(ish)
electromagnetic water softner
« on: June 17, 2021, 05:59:29 pm »
Sounds like bogus science. Do they actually work.
Attached: an example circuit and description from an ancient mag
 

Offline Gyro

  • Super Contributor
  • ***
  • Posts: 7076
  • Country: gb
Re: electromagnetic water softner
« Reply #1 on: June 17, 2021, 06:33:09 pm »
At least that design has some current flowing through the coil - I've seen examples with two insulated single-ended coils, applied to copper pipes.  :palm:  [Edit, even here, the copper pipe will act as a shorted turn].

I have no idea whether it works, I would suspect that, even if the principle is sound, the coil power level would be too small.

There are 'water softeners' sold which have powerful Neodymium magnets clamped to the pipe. I don't know if these work either but the field strength would be much higher.

I can't see why an AC magnetic field would be any improvement on a DC (permanent magnetic) field if the water is in motion through the pipe.
« Last Edit: June 17, 2021, 06:50:23 pm by Gyro »
Regards, Chris

"Victor Meldrew, the Crimson Avenger!"
 

Offline AVGresponding

  • Super Contributor
  • ***
  • Posts: 2376
  • Country: england
  • Exploring Rabbit Holes Since The 1970s
Re: electromagnetic water softner
« Reply #2 on: June 18, 2021, 12:10:08 am »
It would seem to be a relatively simple matter to build and test it.

As to whether it will work; my instinctive answer is "no".
nuqDaq yuch Dapol?
Addiction count: Agilent-AVO-BlackStar-Brymen-Chauvin Arnoux-Fluke-Hameg-HP-Keithley-IsoTech-Mastech-Megger-Metrix-Micronta-Racal-Siglent-Solartron-Tektronix-Thurlby-Time Electronics-TTi-UniT
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf