Electronics > Eagle

Cadsoft EagleCad Tutorials

(1/2) > >>

Ferroto:
I found a decent set of tutorials on eagle cad which will show you everything a beginner would ever need to know when starting off.

Tutorial 1


Tutorial 2


Tutorial 3


Tutorial 4


Tutorial 5


Tutorial 6


Tutorial 7


Tutorial 8


Tutorial 9


Tutorial 10


Tutorial 11


Tutorial 12

Joshua:
Awesome - thank you!!!  Do you know if he uses the auto router? I don't really care how to use the autorouter but every tutorial I've found uses it. I want to learn the tricks of
Hand routing with the program.

Ferroto:

--- Quote from: Joshua on June 26, 2011, 02:34:13 pm ---Awesome - thank you!!!  Do you know if he uses the auto router? I don't really care how to use the autorouter but every tutorial I've found uses it. I want to learn the tricks of
Hand routing with the program.

--- End quote ---

Yes he does manual routing. :)

sacherjj:
Auto routers suck.  That is all.

ivan747:

--- Quote from: sacherjj on June 28, 2011, 12:21:10 am ---Auto routers suck.  That is all.

--- End quote ---

Nothing betas careful hand-routing, unless you are routing a 32-bit parallel bus with 10 control lines and 4 different supply voltages.

Navigation

[0] Message Index

[#] Next page