Author Topic: Help generate Gerbers  (Read 228 times)

0 Members and 1 Guest are viewing this topic.

Online Bud

  • Super Contributor
  • ***
  • Posts: 4210
  • Country: ca
Help generate Gerbers
« on: July 29, 2020, 05:43:21 am »
I need to make a PCB from an open hardware project but do not have a way to produce the Gerbers from the published Eagle project files. Can someone help with this (project archive attached). Also would be helpful if you can convert the binary BRD and SCH to XML format. Thanks!
Facebook-free life and Rigol-free shack.
 

Offline Quarlo Klobrigney

  • Frequent Contributor
  • **
  • Posts: 634
  • Country: pt
  • Behind every alfoil hat is a genius
Re: Help generate Gerbers
« Reply #1 on: July 29, 2020, 11:04:00 am »
I can't convert it to XML (ver 7+ for me) and re-distribute it because that would be a license violation. Besides you never know what embedded stuff is in the finished file that could give me away to the >:D . The gerbers were already in your original zip file but, in a format that several gerber viewers could not read, at least all of them. JLCPCB will make the board directly from the gerber folder without any interaction or intervention necessary on your part. Just zip the gerber folder up and send it off. Here is your file:
« Last Edit: July 29, 2020, 03:57:48 pm by Quarlo Klobrigney »
Voltage does not flow, nor does it go.
 

Offline Quarlo Klobrigney

  • Frequent Contributor
  • **
  • Posts: 634
  • Country: pt
  • Behind every alfoil hat is a genius
Re: Help generate Gerbers
« Reply #2 on: July 29, 2020, 11:51:45 am »
And here's what the gerbers look like in a viewer:
Voltage does not flow, nor does it go.
 

Online Bud

  • Super Contributor
  • ***
  • Posts: 4210
  • Country: ca
Re: Help generate Gerbers
« Reply #3 on: July 29, 2020, 02:05:34 pm »
Thanks Quarlo!
Facebook-free life and Rigol-free shack.
 

Offline Quarlo Klobrigney

  • Frequent Contributor
  • **
  • Posts: 634
  • Country: pt
  • Behind every alfoil hat is a genius
Re: Help generate Gerbers
« Reply #4 on: July 29, 2020, 03:55:19 pm »
No problem there Bud. Or is is Mack, do you even have those north of New York City?

*I forgot to do a DRC check.
Everything is good with the PCB. No errors.
« Last Edit: July 29, 2020, 04:05:47 pm by Quarlo Klobrigney »
Voltage does not flow, nor does it go.
 

Online Bud

  • Super Contributor
  • ***
  • Posts: 4210
  • Country: ca
Re: Help generate Gerbers
« Reply #5 on: July 29, 2020, 04:16:19 pm »
Or is is Mack, ..?

Sorry what was the question again ?
Facebook-free life and Rigol-free shack.
 

Offline Quarlo Klobrigney

  • Frequent Contributor
  • **
  • Posts: 634
  • Country: pt
  • Behind every alfoil hat is a genius
Re: Help generate Gerbers
« Reply #6 on: July 29, 2020, 05:13:53 pm »
Many a film in the ancient <1970 past would call someone for example "What's go'in on there Mack", or "Look Bud I ain't got all day" the second name used most often was Bud.
All the vernacular of NYC and surrounding areas. That's awl.
Voltage does not flow, nor does it go.
 

Online Bud

  • Super Contributor
  • ***
  • Posts: 4210
  • Country: ca
Re: Help generate Gerbers
« Reply #7 on: July 29, 2020, 06:07:38 pm »
I see, thanks  ;D
Facebook-free life and Rigol-free shack.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf