Author Topic: A Guide to Switch from Eagle CAD V 7.x to V 8.x  (Read 3389 times)

0 Members and 1 Guest are viewing this topic.

Offline YTusernameTopic starter

  • Regular Contributor
  • *
  • Posts: 83
  • Country: tr
    • Atadiat
A Guide to Switch from Eagle CAD V 7.x to V 8.x
« on: August 14, 2017, 07:51:17 pm »
I wrote this guide for Eagle CAD users who are thinking about switching to Eagle version 8.x (I think there are many users still afraid to take this step). I tried to cover all points that can help you to make the decision or not.

Good reading:
https://atadiat.com/en/articles/e-switching-from-eagle-cad-v-7-x-to-v-8-x/


 
 
The following users thanked this post: DenzilPenberthy

Offline Karel

  • Super Contributor
  • ***
  • Posts: 2214
  • Country: 00
Re: A Guide to Switch from Eagle CAD V 7.x to V 8.x
« Reply #1 on: August 15, 2017, 08:49:28 am »
I think you missed the point here. The main reason for most (professional) users not to switch to v8, is because of the new license
system. It has been discussed before in very long threads. The fact that you need to login and connect to the internet at least
once in 14 days is unacceptable for a lot of companies.
The only solution is to revert back to the old license system.
 

Offline YTusernameTopic starter

  • Regular Contributor
  • *
  • Posts: 83
  • Country: tr
    • Atadiat
Re: A Guide to Switch from Eagle CAD V 7.x to V 8.x
« Reply #2 on: August 15, 2017, 09:31:45 am »
You're right. I already read a lot of discussions here and in Hackaday articles, but the purpose of this guide is to highlight what switching to V 8.x will take. The decision is up to the reader. I didn't try to encourage the readers to take any discussion.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf