Whew! OSHPark probably might get my board back late June, but I thought I would share what I sent. I thought I may as well not keep improving my project until I can actually see what it will look like - if the silkscreen would work, if the parts will fit right.
Anyhow, here's what I have with the top fill hidden:
(http://i.imgur.com/ZoK8L3a.jpg)
Whole thing is roughly 3x1.5'' which is disconcerting, looks squashed on my low DPI monitor but I'm sure It'll look good in hand and the logo is at least the recommended 200 DPI and Laen's DRC checks out fine and everything, also fixed some of the retarded Eagle footprints although I'll replace those with someone's replacement library I remember who fixes that.
I really like the test points, suppose I haven't a major need to use spring clips or anything fancy for now but it helps and adds a bit of a finished touch to the test. The MC7805CTG is what I chose, LDO, 1A maximum with a clip on TO220 heatsink which should be fine with the ~50-200mA I intend to use it at in the end with margin. I may just drop in a switching module, the LM2574N-5G looks like ~$2 and can do 4.5-30V or something which is quite nice.
I made the mistake of finding there weren't BSS92* transistors, and the layout is GSD instead of SGD, so I'll have to bodge the replacement ZVP4105A in but it should be good and that's what the test is for, I found all the other parts, including 100uF 0.5mm diameter capacitors for cheap!**
*At least on Newark, is it archaic? The BSS- are popular in EU and the 2Nxxxx here? I'm not sure, the -92 seems like a very common transistor, but nonexistent in stock..
** check your capacitor footprints. they are way too small !
this is an annoyance in eagle. every pcb is see has these caps with 100 mil pin pitch.
Well now - I shall update when I get it, and also correct some of the silly things such as mounting holes (probably will mount to the back wall of the project box though) and other essentials I just remembered and just forgot.
Look acceptable for my $20 sent to Laen for 3? :P It's gotta be worth that in pretty purple solder mask and silkscreen alone, IMHO.
Tiger.